Kramer Electronics Ltd.
VP-440X
– Defining VP-440X 4K Presentation Switcher / Scaler
5
Defining VP-440X 4K
Presentation Switcher / Scaler
This section defines
VP-440X
.
Figure 1: VP-440X 4K Presentation Switcher / Scaler Front Panel
#
Feature
Function
48 V (
) Slide Switch
Slide up (48V) to select a condenser type microphone; slide down to
select a dynamic type microphone (we recommend that you slide down
if a microphone is not connected to the
VP-440X
).
MIC 6.3mm Jack
Connect to the microphone source.
Input
Selector
Buttons
HDMI IN
Press to select the HDMI input (from 1 to 4).
PC IN
Press to select the computer graphics input.
MENU Button
Displays the OSD menu.
Menu
Navigation
Buttons
Press to decrease numerical values or select from several definitions.
When not in the OSD menu, press to reduce the output volume.
Press to move up the menu list values.
Press to increase numerical values or select from several definitions.
When not in the OSD menu, press to increase the output volume.
Press to move down the menu list.
Enter
Press to accept changes and change the SETUP parameters.
Press to decrease numerical values or select from several definitions.
When not in the OSD menu, press to reduce the output volume.
RESET TO XGA/1080P
Button
Press and hold for about 5 seconds to toggle the output resolution
between XGA and 1080p, alternatively.
PANEL LOCK Button
Press and hold for about 5 seconds to lock/unlock the front panel
buttons.
To set Lock button functionality, see
1
2
3
4
5
6
7
8