VM-4HDCPXL
Quick Start
P/N: 2 9 0 0 - 3 0 1 2 6 5 QS
Rev: 3
Scan for full manual
VM-4HDCPXL Quick Start Guide
This guide helps you install and use your
VM-4HDCPXL
for the first time.
www.kramerav.com/downloads/VM-4HDCPXL
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check
what’s in the box
VM-4HDCPXL
1:4 DVI (HDCP) Distribution Amplifier
4 Rubber feet
1 Power cord
1 Quick start guide
Step 2: Get to know your VM-4HDCPXL
#
Feature
Function
1
POWER
LED
The green LED is illuminated when the unit is turned ON
2
EDID
Buttons
READ
1. To show the EDID status, press READ
2. To acquire the EDID, press the EDID SELECT button, then press READ
3
SELECT
Press to select the EDID mode (One Output, Default or Auto-mix)
4
OUTPUT STATUS
LEDs (from
1 to 4)
LEDs illuminate when an output(s) is connected and active;
LEDs flash to indicate the type of EDID acquired or when a non-HDCP display is
connected while HDCP content is provided to the
VM-4HDCPxl
5
INPUT
DVI Connector
Connects to the DVI source
6
OUTPUT DVI
Connectors
Connects to a DVI acceptor (from 1 to 4)
7
FOR PROGRAMMING
9-pin D-
sub Port
For service use only
8
Power Connector with Fuse
AC connector enabling power supply to the unit
9
POWER
Switch
Illuminated switch for turning the unit ON or OFF
Step 3: Mount VM-4HDCPXL
To rack mount the machine, attach both rack ears
(by removing the screws from each side of the
machine and replacing those screws through the
rack ears) or place the machine on a table.
•
Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
