Kramer Electronics Ltd.
VIA Connect
– For Web Administrator: Configuring Settings – Gateway Management Pages
14
Configuring VIA Pad Settings
VIA Connect
enables you to configure
VIA Pad
settings that define how a
VIA Pad
device
operates when paired with your
VIA Connect
unit.
To configure VIA Pad settings:
1. Click
Device Management
>
VIAPad Configuration
on the navigation pane.
The VIAPad Configuration
page appears.
2. Select the following as required:
▪
Guest
– Participant can Present by touching the VIA Pad device; the
Kramer VIA
app dashboard is not available.
▪
VIA Pad overrides Room Code
– Participant can join a meeting without entering the
room code.
Room Name is automatically populated; it reflects the name of your
VIA Connect
unit.
3. Select the
Auto Connect to Wi-Fi
checkbox, to configure
VIA Pad
to automatically
connect to the meeting space Wi-Fi network.
The Auto Connect settings appear.
4. Define the following for the meeting space Wi-Fi network:
a. SSID
– Name of the network
Make sure that you write it EXACTLY as defined. This parameter is case sensitive.
b. Authentication Mode
– Security used by your Wi-Fi access point. Select from the pre-
set options:
WEP Open
,
WEP Shared
,
WPA Personal
,
WPA2 Personal
.
c. Encryption
– Type of encryption key used by your router.
d. Key
– Password required to join your network (up to 50 characters max).
VIA Pad settings are configured.
After clicking Apply Settings, the configuration is saved, there is no need to reboot your
unit.
Pairing a VIA Pad Device
Each
VIA Pad
device must be paired to your
VIA Connect
unit before being used by a
meeting participant.
To pair a VIA Pad device to your VIA Connect unit:
▪
Follow the directions below:
