Kramer VIA Campus PLUS, Быстрый старт, Страница: 1 / 4

VIA
Campus PLUS Quick Start (P/N: 2900-301035QS REV 1)
P/N: 2 9 0 0 - 3 0 1 0 3 5 QS
Rev:
1
Scan for full
manual
VIA Campus PLUS Quick Start Guide
For Installer
This guide helps you install and configure your VIA Campus PLUS for the first time.
Go to www.kramerav.com/downloads/VIA Campus PLUS to download the latest user
manual and check if firmware upgrades are available.
Step 1:
Check what’s in the box
VIA Campus PLUS Collaboration Device
HDMI cable extender (M to F) 1 Quick start guide
1 Power adapter (19V DC) DVI to VGA adapter
Step 2: Get to know your VIA Campus PLUS
# Feature Function
1 Power Button For turning the unit on and off.
2 USB 2.0 Connector For upgrading firmware or connecting a USB device.
3 DC IN 19V Connector Connects to the 19V DC power adapter.
4 USB 3.0 connectors Connect to up to 2 USB devices.
5 DVI-I OUT Connector Connect to a DVI display.
6
HDMI IN Connector Connect to an HDMI source (for example, a laptop).
7 HDMI OUT Connector Connect to an HDMI display.
8 eSATA Connector Connect an eSATA drive to expand your storage.
9 LAN RJ-45 Connector Connect to a wireless router or to a LAN.
10 USB 2.0 Connectors Connect to up to 2 USB devices.
11 AUDIO LINE OUT 3.5mm Mini Jack Connect to an unbalanced stereo audio acceptor.
12 AUDIO MIC IN 3.5mm Mini Jack Connect to a microphone.
Step 3: Install VIA Campus PLUS
Install VIA Campus PLUS using one of the following methods:

Mount the unit in a rack using an optional RK-Campus
19” rack adapter.

Place the device on a flat surface.