Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Using the Embedded Web Pages
30
Changing the IP Settings
To change the IP settings:
1. In the Navigation pane, click
Device Settings
. The Device Settings page appears:
Figure 33: Device Settings Page
2. Check/uncheck the
DHCP
box
ON
(default) or
OFF
.
When DHCP is checked:
▪
IP Address shows the device-acquired IP address (from the DHCP server).
▪
Static IP Address, gateway and Subnet are disabled.
Static IP Address is the actual IP address when operating in the non-DHCP mode and is also
the fallback IP address, auto-acquired after no DHCP server detection, with default set to:
•
192.168.1.39 for
TP-594Txr.
•
192.168.1.40 for
TP-594Rxr
.
The confirmation window appears:
Figure 34: Device Settings Page
– Changing to DHCP Mode
DRAFT
