Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
482xl
.
To achieve specified extension distances, use the recommended Kramer cables available at
www.kramerav.com/product/482xl
Using third-party cables may cause damage!
Step 5: Connect power
Connect the power cord to
482xl
and plug it into the mains electricity.
Safety Instructions (See
for updated safety information)
Caution:
•
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
•
There are no operator serviceable parts inside the unit.
Warning:
•
Use only the power cord that is supplied with the unit.
•
Disconnect the power and unplug the unit from the wall before installing.
Step 6: Operate 482xl
If required, adjust the level trimmers with a small screwdriver.
Technical Specifications
INPUTS:
1 unbalanced audio stereo on a 3-pin terminal block connector;
1 balanced audio stereo on a 5-pin terminal block.
OUTPUTS:
1 balanced audio stereo on a 5-pin terminal block connector;
1 unbalanced audio stereo on a 3-pin terminal block connector.
MAX. OUTPUT LEVEL:
Balanced: 21dBu; unbalanced: 21dBu @max gain.
BANDWIDTH (-3dB):
>100 kHz
CONTROLS:
-57dB to + 6dB (balanced to unbalanced level);
-16dB to + 19dB (unbalanced to balanced level)
COUPLING:
Balanced to unbalanced: in=AC, out=DC;
Unbalanced to balanced: in=AC, out=DC
THD+NOISE:
0.049%
2ND HARMONIC:
0.005%
S/N RATIO:
95db/87dB @ balanced to unbalanced/unbalanced to balanced, unweighted
POWER CONSUMPTION:
12V DC, 280mA (fully loaded)
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
-40° to +70°C (-40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98"), W, D, H
WEIGHT:
0.3kg (0.66lbs) approx.
INCLUDED ACCESSORIES:
Power supply, mounting bracket
Specifications are subject to change without notice at
