
PT-2UT
Quick Start
P/N: 2 9 0 0 - 3 0 1 3 5 4 QS
Rev: 2
Scan for full manual
PT-2UT/R Kit Quick Start Guide
This guide helps you install and use your
PT-2UT/R
kit for the first time.
www.kramerav.com/downloads/PT-2UT/R
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
PT-2UT
USB Transmitter
and
PT-2UR
USB Receiver
2 Bracket sets
8 Rubber feet
1 C-USB/AB-6 cable
1 Power adapter and cord
1 Quick start guide
Step 2: Get to know your PT-2UT/R
PT-2UT
#
Feature
Function
1
AUDIO IN 3.5mm Mini Jack
Connect to an unbalanced stereo audio source.
2
USB 2 Type B Port
Connect to USB host.
3
LINK LED
Flashes blue when a link is established.
4
ON LED
Lights green when locally powered by the power adapter.
Lights orange when powered by PoC.
5
LINK OUT RJ-45 Connector
Connect to the LINK IN port on the
PT-2UR
.
6
PROG (Tx, Rx)
5-pin Terminal Block Connector
(with common G pin)
Connect for firmware upgrade.
7
RS-232 (Rx, Tx)
Connect for serial extension (9600 baud rate).
8
12V DC Power Connector
Connect to the supplied power adapter.
PT-2UR
#
Feature
Function
9
LINK LED
Flashes blue when a link is established.
10
AUDIO OUT 3.5mm Mini Jack
Connect to an unbalanced stereo audio acceptor.
11
USB 2 Type A Ports (1 to 4)
Connect to USB devices.
Connect
PT-2UR
directly to the power adapter in order to charge
USB devices.
12
ON LED
Lights green when locally powered by the power adapter. Lights
orange when powered by PoC..
13
LINK IN RJ-45 Connector
Connect to the LINK OUT port on the
PT-2UT
.
14
PROG (Tx, Rx)
5-pin Terminal Block Connector
(with common G pin)
Connect for firmware upgrade.
15
RS-232 (Rx, Tx)
Connect for serial extension (9600 baud rate).
16
12V DC Power Connector
Connect to the supplied power adapter.