Kramer PT-110EDID, Быстрый старт, Страница: 1 / 4

TP-121EDID, TP-123EDID, TP-125EDID, PT-110EDID
Quick Start
P/N: 2 9 0 0 - 3 0 1 2 7 2 QS Rev: 4
Scan for full manual
TP-121EDID, TP-123EDID, TP-125EDID,
PT-110EDID Quick Start Guide
This guide helps you install and use your TP-121EDID, TP-123EDID, TP-125EDID, PT-110EDID for the first
time.
Go to www.kramerav.com/downloads/TP-121EDID to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check
what’s in the box
TP-121EDID, TP-123EDID, TP-125EDID, PT-110EDID XGA/TP Transmitter
4 Rubber feet
1 Power supply (12V DC)
1 Quick start guide
Step 2: Get to know your TP-121EDID, TP-123EDID, TP-125EDID, PT-110EDID
Figure 1: TP-121EDID XGA/Audio Line Transmitter
# Feature Function
1 EDID CAPTURE Button Press to capture the EDID information from the display
2 STATUS LED Illuminates during normal operation; flashes when acquiring the EDID
3 ON LED Illuminates when receiving power
4 XGA IN 15-pin HD (F) connector Connects to the XGA source
5 LINE OUT RJ-45 connector Connects to the LINE IN RJ-45 connector on a receiver
Using a CAT 5 cable with RJ-45 connectors at both ends
6 AUDIO IN 3.5mm mini jack Connects to the audio source
7 12V DC +12V DC connector for powering the unit
Figure 2: TP-123EDID XGA/Audio/Data Line Transmitter
# Feature Function
1 EDID CAPTURE Button Press to acquire the EDID information from the display
2 STATUS LED Illuminates during normal operation; flashes when acquiring the EDID
3 ON LED Illuminates when receiving power
4 XGA IN 15-pin HD (F) connector Connect to the XGA source
5 LINE OUT RJ-45 connector Connects to the LINE IN RJ-45 connector on the TP-124 XGA/Audio Line Receiver
Use a CAT 5 cable with RJ-45 connectors at both ends
6 RS-232 terminal block connector Connects to the PC or the Remote Controller
7 AUDIO IN 3.5mm mini jack Connects to the audio source
8 12V DC +12V DC connector for powering the unit