Kramer PIP-4, Руководство пользователя, Страница: 7 / 34

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the PIP-4, 4 input Picture-in-Picture Inserter
4

A multi-standard, picture-in-picture video inserter that accepts up to four
composite video sources and displays them all on the same screen
simultaneously

s-Video and composite video outputs

Non-volatile memory that retains the last setting
1
With the PIP-4 , you can:

Position sources on the screen as desired and select their size dynamically
using a mouse or by selection from a list

Freeze the output

Output video as both s-Video and composite signals
In addition, the PIP-4 :

Includes 10-bit video A/D and D/A converters throughout the unit, ensuring
the highest quality video

Can be operated locally via:

The front panel buttons

A user-friendly OSD (On-Screen Display) menu

Can be operated remotely via an IR remote controller, RS-232 and Ethernet

Is rugged and dependable
3.1 Recommendations for best performance
To achieve the best performance:

Connect only good quality connection cables
2
thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise levels
(often associated with low quality cables)

Avoid interference from neighboring electrical appliances and position your
PIP-4 away from moisture, excessive sunlight and dust
4 Defining the PIP-4, 4 input Picture-in-Picture Inserter
Figure 1 and Table 1 define the front panel of the PIP-4, 4 input Picture-in-Picture
Inserter .
1 Provided the last setting was valid for at least 30 seconds before switching the machine off
2 The complete list of Kramer cables is available from http://www.kramerelectronics.com