PA-50HZ Quick Start (P/N: 2900-300927QS REV 2)
P/N:
2 9 0 0 - 3 0 0 9 2 7 QS
Rev: 2
Scan for full manual
PA-50HZ Quick Start Guide
This guide helps you install and use your
PA-50HZ
for the first time.
http://www.kramerav.com/downloads/PA-50HZ
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check w
hat’s in the box
PA-50HZ
50W Power Amplifier
4 Rubber feet
1 Power adapter and cord
1 Quick start guide
Step 2: Get to know your PA-50HZ
#
Feature
Function
1
ON LED
Lights green when powered on, orange when in standby.
2
PROTECT LED
Lights red in case of over-current / short circuit / over-heat.
The device powers down until operational conditions are corrected and automatically
powers up.
3
INPUT 3-pin Terminal Block
Connector
Connect to a line-level, balanced, mono audio source.
4
VOLUME Attenuator
Volume for speaker output.
5
LINE OUT 3-pin Terminal Block
Connector
Connect to a balanced, mono audio acceptor (for example, amplified speakers).
6
Hi-Z Out 3-pin Large Terminal Block
Connectors
Connect Hi-Z and COM to mono Hi-Z speakers.
Speaker can output a mono signal.
7
48V DC Power Terminal Block
Connector
Connect to the Kramer power adapter.
Step 3: Install the PA-50HZ
Install
PA-50HZ
using one of the following methods:
Mount the unit in a rack using an optional RK-1 rack adapter.
Attach the rubber feet and place the unit on a flat surface.
