OSP-SM10S
Quick Start
P/N: 2 9 0 0 - 3 0 1 2 3 8 QS
Rev: 1
Scan for full manual
OSP-SM10S Quick Start Guide
This guide helps you install and use your
OSP-SM10S
for the first time.
www.kramerav.com/downloads/OSP-SM10S
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check
what’s in the box
2
OSP-SM10S
10G SFP+ Simplex Transceivers
(A and B)
1 Quick start guide
Step 2: Get to know your OSP-SM10S
#
Feature
Function
1
LC Connectors
For connecting fiber optic cable. Covered with protective cap when not in use.
2
Bail (Handle)
Pull down the handle for easy removal of the transceiver from the optical device.
3
Protective Cap
Protects the LC connector from dust.
Note:
When transporting or storing an unconnected device, keep the cap on to protect
against dust.
4
SFP+ Module Interface
Connects to the optical module SFP+ port.
Step 3: Safety Instructions
Warning: Class 1 Laser Product:
•
Invisible laser radiation present.
•
Avoid long-term viewing of laser.
•
Avoid the use of magnifying viewing aids or instruments (such as binoculars, telescopes,
microscopes and magnifying lenses, but not spectacles or contact lenses).
•
Avoid placing optical devices in the emitted beam that could cause the concentration of the
laser radiation to be increased.
•
Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
Step 4: Operation and Installation Warnings
•
OSP-SM10S
is designed to be used with LC(PC) and LC(UPC) cable connectors. Using an LC(APC) connector
causes poor performance and can damage the optical module connector.
•
Always inspect and clean the connectors before you make a connection.
•
Always use the connector housing to plug or unplug a fiber cable.