Kramer Electronics Ltd.
MV-4X
– Using Embedded Web Pages
41
To configure the auto layout:
1. In the Navigation List, click
AV Settings
. The Matrix tab in the AV Settings page
2. From the top menu bar, select
Auto Layout
.
in the following example, 2 inputs are active, therefore the
Single Input
and
2 Inputs
operation modes are available.
Figure 26: Multi View Tab
– Auto Layout Mode
Auto Layout modes are defined.
Managing EDID
MV-4X
provides the option of four default EDIDs, two sink sourced EDIDs and four user
uploaded EDIDs that can be assigned to all inputs at the same time, or to each input
independently.
When a new EDID is read to an input, you may view a brief blink on the output.