Kramer KW-14R-IL, Руководство пользователя

Страница: 23 / 35

KW-14T-IL/KW-14R-IL - Mounting the KW-14T-IL and the KW-14R-IL 19
Figure 10: Drilling Pilot Holes in the Center of the Mounting Holes. Not to scale
4. Remove the template.
5. Insert two screws (the type of screw depends on the surface on which you
are mounting the units) into the mounting holes and tighten them until the
screw heads protrude from the wall at the following distances:
•
Transmitter
—approximately 4.7mm (3/16 inch)