KT-107SC
,
KT-107SCRB
Quick Start
P/N: 2 9 0 0 - 3 0 1 3 3 7 QS
Rev: 3
Scan for full manual
KT-107SC / KT-107SCRB Quick Start Guide
This guide helps you install and use your
KT-107SC
/
KT-107SCRB
for the first time.
www.kramerav.com/downloads/KT-107SC
to download the latest user manual and check if firmware
upgrades are available.
Step 1:
Check what’s in the box
KT-107SC
KronoMeet Touch Panel
or
KT-107SCRB
KronoMeet Touch
Panel
(Reduced Bandwidth)
5V AC/DC adapter
On-wall mount unit
1 Quick start guide
1 C-USB/Micro B cable
Installation screws
Panel mount plate
1 right-angle OTG USB cable
Step 2: Get to know your KT-107SC / KT-107SCRB
#
Feature
Function
1
Hidden Reset Button
Located on top side. Insert a pin and hold for a few seconds to reset
KT-107SC
.
2
Light Sensor
Automatically adjusts the screen brightness according to the room lighting conditions.
3
Activity RGB LED
Lights green when powered, flashes green when charging the battery, lights red when
camera is on.
4
Camera
For remote room viewing or video conferencing.
5
Microphone
For audio communication, recording or conferencing.
6
Speakers
To output the sound.
7
Tabletop Mount Connector
For connecting to the tabletop mount.
8
Cover
Covers the wall mount connections and power button.
9
Power Button
Press to power on the
KT-107SC
. When powered, press briefly to open the pop-up menu
and power down the device, reboot it or return to the Home-page. Press and hold to
power down the device immediately. This button is also used for firmware upgrade.
10
Volume-up Button
Used for firmware upgrade. Use also to increase
KT-107SC
speaker volume.
11
Micro USB Port
For connecting to an adjacent on-wall USB device and for firmware upgrade.
12
Flat Cable Connector
For connecting to the on-wall mount unit.
13
Connecting Holes
For connecting to the panel mount plate. To prevent potential damage to the
KronoMeet
Touch Panel
, use only Kramer supplied screws and mounts.