KDS-USB2
Quick Start
P/N: 2 9 0 0 - 3 0 1 3 9 1 QS
Rev: 3
Scan for full manual
KDS-USB2 Kit/KDS-USB2-EN/KDS-USB2-DEC
Quick Start Guide
This guide helps you install and use your
KDS-USB2
for the first time.
www.kramerav.com/downloads/KDS-USB2
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
KDS-USB2-EN
and/or
KDS-USB2-DEC
1 Power adapter and cord (for
KDS-USB2-DEC
)
1 Quick start guide
1 USB2 cable A male to B male (for
KDS-USB2-EN
)
Step 2: Get to know your KDS-USB2
KDS-USB2-EN
#
Feature
Function
1
Power LED
Lights blue when power is supplied by
KDS-USB2-DEC
USB connection.
2
Link LED
Lights green when a USB link is established between the encoder and the decoder.
Flashes slowly when the unit attempts to establish a link. Flashes quickly when in pairing mode.
Off when a link is not established.
3
Host LED
Lights green when
KDS-USB2
is properly enumerated on the host computer.
Flashes when in a suspended state.
4
Activity LED
Lights yellow when activity between the decoder and encoder/s is detected.
Off when in suspended mode.
5
Config Button
For factory use.
6
Mode Button
Use for pairing
KDS-USB2-EN
with the
KDS-USB2-DEC
decoder/s.
7
USB Host Port
Connect to the host computer.
8
Link
RJ-45 Connector
Connect to the
KDS-USB2-DEC
.
KDS-USB2-DEC
#
Feature
Function
9
USB Ports
Connect up to 4 USB type A devices.
10
Power LED
Lights blue when 24 V power is supplied.
11
Link LED
Lights green when a USB link is established between the encoder and the decoder.
Flashes slowly when the unit attempts to establish a link. Flashes quickly when in pairing mode.
Off when a link is not established.