Kramer Electronics Ltd.
KDS-8-MNGR
– Using Embedded Web Pages
35
Creating Macros
KDS-8-MNGR
can create operational command sequences that can be activated via
Kramer
Control
, external triggers, or from within the embedded web pages. Macros are a flexible and
powerful tool. They can be as simple as selecting a new input for a decoder or
a complex
sequence of source, resolution, mode, and audio changes executed in sequence. Up to 16
macros can be defined, each containing up to 64 commands.
To create a Macro:
1. In the Menu tabs, select
Settings
. The Group page appears.
2. Click
Macro
. The Macro page appears.
Figure 23: Settings Tab
– Macro Page
3. Click
to create a new macro.
Click
to edit an existing macro.
Click
to delete a macro.
4. Next to Order, open the drop-down box to select the macro order (also use to change
the order of existing macros).
Macros are displayed in the Monitor & Control tab in the same order and when
assigning IR/trigger functionality.
5. Enter Macro Name.
6. Under New Command:
a. Click
New
.
b. Select the command type from the drop-down list.
c. Select the other parameters relevant for this command type (Transmitter and
Receiver for this command).
d. Set the command order in the macro sequence.
