Kramer Electronics Ltd.
K-Cam4K
– Defining K-Cam4K 4K PTZ Camera
4
Defining K-Cam4K 4K PTZ
Camera
This section defines
K-Cam4K
.
Figure 1: K-Cam4K 4K PTZ
Camera
#
Feature
Function
Camera
Front and rear views.
Front Panel OLED
Displays frame rate and resolution for HDMI and SDI output signals,
as well as the IP address.
POWER LED
Lights when powered.
STANDBY LED
Lights when in standby mode.
Tilting Mechanism
Can be set to any of 255 preset positions.
RESET
Press for 5 seconds to reset to factory default parameters.
NET RJ-45 Connector
Connect to your network or directly to a computer (supports PoE).
RS232 8-pin
DIN Connector
IN
Connect to a camera controller using the included RS-232 VISCA
(m) to 9-pin D-sub (f) cable.
OUT
RS485 2-pin Terminal Block
Connector
N/A
LINE IN 3.5mm Mini Jack
N/A
HDMI Out Connector
Connect to a recording/streaming device.
3G-SDI Out BNC Connector
Connect to a recording/streaming device.
USB 3.0 Type-B Connector
Connect to computer or collaboration device using the USB-3 cable
(included).
DC 12V Power Connector
Connect to the 12V power adapter.
ON/OFF Switch
Turn the unit on and off.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16