Kramer FC-21ETH, Руководство пользователя

Страница: 32 / 60

28 Remote Operation via the Web Pages
7.5 Serial Port Settings Page
The Serial Port Settings page allows you to:

Set the following Ethernet parameters for each Ethernet port:

Select TCP or UDP

IP port label

TCP keep alive time 0-3600sec (default 60sec), after which the detected
idle connection is disconnected

Set the following serial parameters for each serial port:

Parity

Data bits

Baud rates

Stop bits

Select whether or not to send replies on the port to the new client
Figure 18: Serial Port Settings Page