Kramer Electronics Ltd.
DIP-31
– Operating DIP-31 Remotely Using Web Pages
22
Video and Audio Settings Page
The Video and Audio Settings page lets you modify the video, audio and timeout parameters.
Figure 12: Video and Audio Settings Page
Item
Description
Video selection mode Indicator
Indicates the current video selection mode; manual, auto, or auto last
connected.
Video auto switching priority
Buttons
Click and drag the buttons to the required priority level to use when in auto
mode.
Audio selection mode Indicator
Indicates the current audio selection; manual, auto, or auto last connected.
Current selection Audio
Indicator
Indicates the current audio selection; Embedded or analog.
Audio only mode Buttons
Select to enable/disable audio only mode.
Disabled-Audio only mode is disabled.
Enabled-Audio only mode is enabled.
When enabled, if there is no video signal in the input, the device outputs a
black pattern and the analog audio input will continue to input any audio
signal.
HDCP Support (on HDMI
inputs) Buttons
Select HDCP support for HDMI 1 and HDMI 2 inputs.
Disabled-HDCP encrypted content is not passed.
Enabled-HDCP support is dictated by the display.
Delay switching upon signal
loss for (leave 5V on) Box
Sets the delay for video and audio before switching (in auto mode) because
of a signal loss on the currently selected input. Value in seconds (see
Loss and Unplugged Cable Timeouts
).
Delay switching input upon
cable unplug for Box
Sets the delay for video and audio before switching (in auto mode) because
the currently selected input cable is unplugged. Value in seconds (see
Loss and Unplugged Cable Timeouts
).
Delay power off 5V upon
signal loss for Box
Sets the delay for turning off the 5V output because of a signal loss on the
currently selected input. Value in seconds (see
).