Kraft Powercon PRX Series, Руководство пользователя

Страница: 8 / 24

8
KraftPowercon Sweden AB, Hjalmar Petris väg 49, S-352 46 Växjö, Sweden, Tel: +46 470-705200, Fax: +46 470-705201,
www.kraftpowercon.com
3.1.4 Electrical data for rectifier module
Output data Input data
U
NOM
Setting
range
I
RATED
Voltage
range
Mains
power *1
Mains
current *1
Model
designation,
rectifier
module
(V
DC
) (V
DC
) (A) (V
AC
) (VA) (A
rms
)
Power
loss
*2
L0500B-IW 20 85 - 295 670 3.4 92
V1500B
24 21 – 28
60 180 - 264 1960 10.0 187
L0600A-IW 12 85 - 295 800 4.1 92
L1250A-IW 25 85 - 295 1600 8.2 156
L2500A-IW
48 42 - 56
50 150 - 295 3150 16.1 312
L1250K 110/125 97.5 - 145 10 90 - 300 1410 7.2 139
*1
: max at 195 V
AC
*2
: type at 230 V
AC
and full load
3.2 Environmental data
Class of enclosure ..................................................IP21 as per EN 60529
Cooling ..................................................................Temperature controlled fans in rectifier
modules
Ambient temperature (specified data applies).........0 to +40 °C
Storage temperature ..............................................-40 to +70 °C
Humidity ...............................................................<90 % RH, non-condensed
Altitude above sea level ........................................<2000 m
Noise level at +20 °C, fully equipped ....................<54 dBA
3.3 Mechanical data
Design................................... Wall cabinet
Arrangement ........................ On a wall indoors in dry, clean room
Weight .................................. 13 kg, fully equipped
Dimensions .......................... 340/245/227 mm (h/w/d), see also dimension diagram
Appendix_A
Colour................................... RAL 7035 light grey
Cable inlets ........................... From underneath
3.4 Conformity with standards
EN 60529........................... Class of enclosure IP21
EN 50178........................... LVD. Electronic equipment, including power electronics in electrical
power installations.
EN 50272-2 ....................... Safety requirements for secondary batteries and battery installations
EN 61000-6-2 .................... EMC. Immunity for industrial electronics
EN 61000-6-3 .................... EMC. Emission standard for commercial and light-industrial
environments