manualshive.com logo in svg

KR-sabers VERSO, Руководство пользователя

Поделиться
Скачать
KR-sabers VERSO Скачать руководство пользователя страница 3

02 |

user manual made by KR-sabers and Dmitry Shtok

Home

Specifications and features:

– Dimensions: 18.9x29.9x4.5mm (+2.4mm longer with micro SD card)
– Power supply: 3-5 Volts, up to 10A per LED channel output; single Li-Ion 3.6-3.7V (low 2.6V, full 4.2V) battery recommended
– 0.55 mA current consumption in Deep Sleep
– 3 high power LED channels
– 1 or 2 buttons control options
– Speaker: 4 ohm or 8 ohm, 2W-5W
– up to 16 sound banks/fonts
– up to 16 blade color profiles
– up to 16 blade effects
– smooth accent swings
– Sound FX (WAV sound files): boot, hum, swing, clash, ingnition, retraction, lockup, blaster blocks, low battery, font name etc.
– Light FX: ramp up, ramp down, fade, blade flickering, flash on clash, fire, unstable, rainbow
– Micro SD card: 4-16Gb Class 4-10 by SanDisk brand recommended
– 3 Watts 5V powered sound amplifier, 16-bit digital output
– 44kHz or 22kHz WAV audio files sample rate
– “SmoothSwing”, monophonic, polyphonic sound fonts support
– APA102 (RGB), WS2812B (RGB), SK6812 (RGB, WWA) Neopixel/Pixelblade support
– 1/2/3-color LED stars (Tri-Cree LED modules) support
– Easy and free firmware updates by user via micro-SD card

Demonstration videos:

Link to the demonstration video by KR-sabers
Link to the demonstration video by ShtokCustomWorx

FEATURES

Video tutorials by KR-sabers:

Video tutorials by KR-sabers on YouTube

LED Resistor Calculator

Содержание VERSO































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды