Kozy-World GFD4360 Скачать руководство пользователя страница 1

               

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 

  

  Do not store or use gasoline or other flammable vapors and liquids in vicinity of 

this or any other appliance. 

 

WHAT TO DO IF YOU SMELL GAS 

·

 

Do not try to light any appliance. 

·

 

Do not touch any electrical switch; do not use any phone in your building. 

·

 

Immediately call your gas supplier from a neighbor

s phone. Follow the gas 

supplier

s instructions. 

·

 

If you cannot reach your gas supplier, call the fire department. 

 

  Installation and service must be performed by a qualified installer, service agency 

or the gas supplier. 

VENT-FREE GAS FIREPLACE  

GFD4360 

INSTALLER: DO NOT DISCARD THIS MANUAL 

 LEAVE FOR HOMEOWNER

FUTURE REFERENCE.

 

 

WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED 
EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL 
INJURY, OR LOSS OF LIFE. 

WM-GFD4360-0903 

CAUTION 

 FOR YOUR SAFETY

 

This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is 
installed. Provisions for adequate combustion and ventilation air must be provided. 
Refer to 

Air for Combustion and Ventilation

 section on page 7 of this manual.

 

 

This appliance may be installed in an aftermarket, permanently located manufactured 
(mobile) home, where not prohibited by local codes. This appliance is for use with the 
type of gas indicated on the rating plate only. This appliance is not convertible for use 
with other gases. 

 

WARNING:  

This appliance is equipped 

for  (Natural  and  Propane)  gas.  Field 
conversion  is  not  permitted  other  than 
between natural or propane gases. 

 

Kozy-World

 

®

 

Questions

problems,  missing parts? 

 Before returning to your retailer, call the KOZY WORLD PHONE 

NUMBER (814)643-1775 
   

Содержание GFD4360





















































Отзывы: