10
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
Komfort Zone Kit #KZK-050
3.2 Combustible Finish
NOTE: It is not required to use the #KZK-050DT discharge trim if desired
to run finishing material up to the finishing material standoff. Finishing
material must not block the opening and must be run evenly along the
plenum opening.
WARNING! RISK OF OVERHEATING AND FIRE! Ensure the KZK duct
system is installed in accordance to this manual AND the convection
baffle is removed when using these combustible clearances.
9
¾
”
(248mm)
26
½
”
(673mm)
16
¾
”
(425mm)
NOTE: THESE MANTEL CLEARANCES APPLY ONLY WHEN THE KZK DUCT SYSTEM
IS INSTALLED
AND
THE CONVECTION BAFFLE REMOVED.
COMBUSTIBLE WALL FINISH
MAY BE INSTALLED OVER CEMENT
BOARD AND BUTT UP TO THE
FINISHING EDGE AROUND THE OPENING
EACH SQUARE REPRESENTS
1” (25mm)
OF MANTEL PROJECTION
FIREPLACE ENCLOSURE FLOOR
STEEL
FRAMING
FINISHING EDGE
FINISHING EDGE
12” (305mm)
9” (229mm)
6” (152mm)
12” (305mm)
9” (229mm)
6” (152mm)
Figure 3.3, KZK-050 Mantel Clearances
