SECTION 4
FACING AND FINISHING
Facing Requirements
#CLW-50-MV
R.1 October 2021
34
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
4.1.3 (cont.)
Facing Requirements
3
¾
”
(95mm)
13”
(330mm)
9
¾
”
(248mm)
1
½
”
(38mm)
13”
(330mm)
3
¾
”
(95mm)
No Screws Allowed
No Screws Allowed
No Screws Allowed
Non-Combustible Finishing Material Only
SCREW PATTERN LOCATIONS
21
½
”
(545mm)
66”
(1676mm)
6
3⁄8
”
(161mm)
48
¾
”
(1238mm)
53
½
”
(1359mm)
16
¾
”
(425mm)
10
½
”
(267mm)
Combustible Material Allowed
Non-Combustible Material Only
Steel Framing Required
Lower Cover Panel
Combustible Material Allowed
Non-combustible
material only
Combustible material
allowed
Combustible material allowed
see image below for acceptable
screw locations
FIGURE 4.4
Minimum Non-Combustible Finishing Dimensions Screw Locations for all installations
FIGURE 4.3
Minimum Non-Combustible Finishing Dimensions for all installations
ALL DESIGN OPTIONS INSTALLATION
ALL DESIGN OPTIONS INSTALLATION
