1
Getting Started
In This Chapter. . . .
— Introduction— Conventions Used— Selecting the Proper Module
Страница 1: ...1 Getting Started 1 In This Chapter Introduction Conventions Used Selecting the Proper Module ...
Страница 2: ...eed assistance please call us at 770 844 4200 Our technical support group is glad to work with you in answering your questions They are available Monday through Friday from 9 00 A M to 6 00 P M Eastern Standard Time If you have a comment or question about any of our products services or manuals please fill out and return the Suggestions card that was shipped with this manual Conventions Used When ...
Страница 3: ... The specifications and wiring diagrams for the nine discrete I O modules can be found in the next chapter A full description of five analog modules and one memory module can be found in their respective chapters in this manual The D0 DEVNETS is described in the manual D0 DEVNETS M The following table lists the modules available Part Number Description D0 10ND3 10 point DC Input D0 16ND3 16 point ...
Страница 4: ... 0A OUTPUT 6 240V 50 60Hz 2 0A 6 27V INPUT 12 24V 3 15mA Y X 40VA 50 60Hz PWR 100 240V 0 1 2 3 4 5 6 7 10 11 12 13 14 15 16 17 20 21 22 23 PORT1 PORT2 TERM RUN STOP PWR RUN CPU TX1 RX1 TX2 RX2 D0 06DR Now insert the module into the open slot Locate the module so the printed information is oriented in the same direction as the markings on the PLC Be careful to align the female connector on the prin...
