Kostal PIKO 1.5 MP, Руководство по эксплуатации

Страница: 44 / 80

1. Press
SET
to call up the item.
2.
Press s to select "Energy meter".
3. Press
SET
.
4. Press
ESC
to go one level higher to Energy management.
NOTICE!
The power fed into the grid is adjusted in 10 W steps. It can
be limited to a minimum of 0 W.
1. Press
SET
to call up the item.
NOTICE!
The inverter can only work with energy meters that
have been pre-programmed in the inverter. The pre-
programmed energy meters are listed under
Meter
type
.
2.
Press
rs
to select a meter type.
3. Press
SET
.
4. Press
ESC
to quit the sub-menu.
4.9 Switching the inverter on
Place DC load-break switch on the inverter on position
I
(Fig. left).
After testing via the internal MSD (approx. 2 minutes), the power fed
into the grid can be shown on the display (assuming that sunlight is
present).
Mode
Dynamic feed-in regula‐
tion
Configuration of the
energy meter
Installation
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP 44