The reset value will depend on the setting
value according to 4-5 Maintenance
Mileage Setting.
●
Maintenance
Mile
age "Reset" scr
een.
●
Ex: Reset the Maintenance Mileage
from -1 to setting value.
In Maintenance Mileage Reset screen,
press the Adjust button to give up the
reset and then warning light will back to
light on steady from flashing.
In Maintenance
Mile
age Reset scr
een, press
the
Adjust button
to give up the reset and
then warning
l
ight w
ill back to l
ight on steady
from flas
h
ing.
●
Pr
ess and hold the
Adjust button for 3
seconds
to confirm the
Maintenance
Mileage to be reset.
●
In the oil
maintenance
mile
age sc
reen,
Pr
ess and hold the
Adjust button for 3
seconds
to enter the Maintenance
Mile
age
"Reset"scr
een .
NOTE
●
In main screen, press down the
Select & Adjust buttons at the same time for 3 seconds
to enter the setting screen.
●
Press the
Adjust button
to select in following order start from Circumference and sensing point
、
Fuel gauge
resistance (Ω)
、
Clock setting
、
Backlight brightness setting
、
Oil maintenance mileage
、
Odometer
、
Internal
ODO display .
The screen will return to the main screen after 30 seconds if no button is pressed.
3-5
Setting screen instruction
●
In main screen
●
Internal ODO display
●
Odometer
●
Oil maintenance
mileage
NOTE
In any screen, you can press and hold down the
Select button for 3 seconds
to go back to the main screen.
●
Circumference and
sensing point
●
Setting screen
●
Fuel gauge resistance
●
Clock setting
●
Backlight brightness
setting
4
Entering setting screen
●
In the main screen, Press
and ho
ld the
Select and Adjust button for 3 seconds
to enter the setting screen.
●
Press the
Select button once,
to enter
to enter the circumference and sensing
point setting screen.
4-1
Circumference and sensing point setting
Reset this setting value when you
change to a different size tire.
NOTE
●
Press the
Select button
to the digit you
want to set.
●
Ex: If the tire circumference is
1
,
300 mm.
●
Ex: Now the tire circumference is setting
from 1,000 mm.
Setting range
:
300 ~ 2
,
500 mm
Setting unit
:
1 mm
The digit in thousands setting number
will flash
●
You can define the
valve as the starting
point and the terminal
point to measure the
wheel circumference
with a measuring tape.
●
Measure the tire circumference (The tire
you will install the sensor on) and make
sure the number of magnet sensor point
(You can install the magnet into the disc
screw or the sprocket screw.)
●
The speed displayed on the meter will be
affected by the setting, make sure the
setting number is correct before you
make the setting.
P.S.
