11
2 mm Allen key X 1
9
10
4 mm Allen key X 1
3 mm Allen key X 1
2-1
Wiring installation instructions
2-2
Installation instruction
A
C
B
Motor oil indicator can be set up, install as two stroke motor oil indicator, or other po12V) or negative actions' indicator.
YAMAHA
HONDA
SUZUKI
KAWASAKI
SYM
KYMCO
PGO
Main power switch wire reference:
Power
Ground
Brown
Brown
Black
Green
The color listed above may differ depending
on the model and year.
Black
Black
Black
Black
Green
Green
Key on
Red
Red
Red
Red
Red / White
Orange
Green
Red / Black
White
Black / Yellow
Yellow / Green
YAMAHA
HONDA
SUZUKI
KAWASAKI
BMW
BENELLI
APRILIA
Light Blue
Yellow /
Blue
Yellow / Black
Black
Gray / Violet
Gray / Violet
DUCATI
BUELL
CAGIVA
H-D
MV
Gray / Green
Gray / Green
Gray / Yellow
Pink
Pink
Red
TRIUMPH
RPM wire reference:
The color listed above may differ depending
on the model and year.
YAMAHA
SUZUKI
HONDA
Yellow / White
Yellow / White
The fuel sensor is electronic type, do not connect
in parallel with the original wire - otherwise
the fuel gauge won't display.
The wrong installation of the fuel
wire might damage the instrument.
Green
Fuel indicator wire reference:
KAWASAKI
SYM
KYMCO
PGO
Black / L Green
Gray
Yellow / White
Yellow / White
Brown / Red - RPM wire please
connect it to the suitable position
according to the models
R
(Accessories 4)
PM wire (TYPE B)
PM wir
R
(Accessories 3)
e (TYPE A)
Ignition coil positive
Pick up
R
(Accessories 4)
PM wire (TYPE B)
Tachometer
Flywheel
Ignition
pulse
Coil
Spark plug wire
Spark plug Spark plug
cap
Active speed sensor (Accessories 5)
Connect to speed sensor
Black - Ground wire connect to the negative pole of
the battery (must be a good ground)
Brown - Positive wire should be connect to main
power switch
Red - Postive pole
(Connect to the
battery DC 12V)
Mid-way connector
Orange - L turn signal light (+12 V)
Blue - R turn signal light (+12 V)
Yellow - High beam light (+12 V)
Gray - Oil light (+12 V / ─)
White - Neutral light (─)
Green - Fuel
Purple - Engine light (─)
Yellow / White -
Water temperature light (─)
NOTE
When connecting the power wire, please follow carefully the instruction. If the red & brown wires are connected in parallel, the meter won’t
work properly.
NOTE
The RPM wire installation
We recommend installing the R type spark plug or low-resistance spark plug cap at the same time.
A.
Connect the RPM wire (Type A) on the spark plug wire by connecting the male and female connectors.
B.
Connect the RPM wire (Type B) to the pick up sensor.
C.
Connect in parallel the RPM wire (Type A) with the original tachometer signal wire.
The best signal source will be in order as C>B>A, we will suggest you to check different ways if you have problems to get the
RPM signal.
When installing, please follow the steps bellow.
1. M5 x 12L screw x2 (Accesories 13)
2. Meter bracket for handle bar (Accesories 12)
3. Fix the bracket on handle bar (7/8 inch)
4.Bracket x1 (Accesories 12)
5. Meter (Accesories 1)
6. Meter board (Accesories 12)
7. M4 washer x2 (Accesories 15)
8. M4 x 10L screw x2 (Accesories 14)
Adjust the meter to the proper angle before tightening the
handle bar bracket screws.
NOTE
Special instruction for meter fix board.
A. Push meter bracket
clip up to lock meter
fix board with meter
on bracket
B. Push meter bracket
clip down to release
meter fix board with
meter on bracket
1
2
3
2
4
7
8
6
5
INSTALLATION
Thank you for purchasing the our product. Before installing, please read the instruction carefully and keep it for future reference.
Notice
◎
Mark Meaning:
Some processes must be followed to avoid the damage to the vehicle.
Some processes must be followed to avoid the affection caused by wrong installation.
Some processes must be followed to avoid damages to yourself or the public.
WARNING!
CAUTION!
NOTE
Yo
NOTE
Contact your local distributor, if the items received in the box are not the same as the items listed above.
NOTE
Some of the optional accessories may not be available in your area. Contact your local distributor to obtain more information.
u could get the installation details from the information behind the mark.
PRESS THE
BUTTON
ONCE
FLASH
LIGHT ON
PRESS THE
BUTTON 3
SECONDS
Please, follow the step-by-step instructions for proper installation. Any damages caused by faulty installation shall be imputed to the users.
●
●
To avoid a short circuit, do not pull the wires when installing the unit. Do not break or modify the wires either.
●
Do not disassemble or change any parts.
●
Maintenance and repairs should be executed by our professionals only.
●
1-1
Accessories
1-2
Accessories
1
Meter X 1
3
4
RPM wire
(TYPE A) X 1
RPM wire
(TYPE B) X 1
2
Main wiring harness X 1
6
M8 / S type speed
sensor bracket X 1
7
M10 / S type speed
sensor bracket X 1
Active speed sensor X 1
5
8
M5 X 5L mm Hexagon
screw X 2
15
Meter bracket X 1
13
14
M4 washer X 2
M4 X 10L screw X 2
12
M5 X 12L screw X 2
JIS TYPE A
1
Digital speed signal
sensor
RUNNER
2
Digital speed signal
sensor
SR
X-FIGHT
BOOSTER
3
Digital speed signal
sensor
5
Meter bracket
4
L TYPE speed sensor
backet
wh041ba02a(P6-1)
