background image

DANGER

Read this "Safety Precautions" before operation.

Below information should not be neglected for proper use of this product. 
Your understanding can prevent harm or danger to user or others.

   

Common points for all series

High Performance Self-Priming Engine Pump

Avoid fire when refuel or maintenance. 
Highly inflammable!

 
Do not operate Hidels pump inside a room or under 
bad ventilation condition. 
Harmful substances are in 
exhaust gas. There is danger of gas poisoning.
 
In case of operating Hidels Pump in a well or in a hollow, 
the person operating the pump must not enter the small 
space
 as there is danger of gas poisoning.

 
Do not use pump on slope.
Fuel spillage at tank cap or carburetor may cause fire.
 
Do not put any obstacle around engine muffler. 
It may cause fire or breakage.

Read carefully and understand fully before use.

 
Keep children away from pump when in operation.

 
Do not overhaul or repair, except by person who is 
trained to do so.

CAUTION

Do not touch muffler or any part of the engine.
It could cause burn.
 
Use this pump for clean water or agriculture water. 
Not Suitable: drinking water, mud water, seawater, kerosene, light oil,

heavy oil, gasoline, chemical, acid, alkaline etc.

 
Use correct type of suction hose.   
Water temperature tolerance: 5 to 45˚C. 
May cause breakage if use outside the mentioned range.
 
Please don't run pump without water inside the pump.
This will cause pump damage.

Please use suction hose for suction side. Please 
purchase suitable hose to fit to connection dia and 
suitable length.
 
Please firmly connect hose with coupling and hose 
band 
when you connect suction or delivery hose to pump.

LABEL

Replace name plate if damaged/peeled, 
please order with sales store.

1. Application

As this pump is design for agriculture use, do 

not apply with muddy water.

*

Trouble if you don't observe. 
Could damage mechanical seal.

  

2. Priming

As this pump is self-priming type, fill water 

fully into priming port before running. 

*

Trouble if you don't observe. Impossible to start 
pumping and may damage mechanical seal.

  

3. Connection of suction hose

If pump does  not work after filling water into priming port, it is likely due to 

poor connection of suction hose. In such case, check hose connection again 
before starting pump.

* Trouble if you don't observe. Impossible to pump.

  

4. Engine oil

F i l l   e n g i n e   o i l   i n t o   o i l i n g   p o r t ,   s h o w n   i n  
illustration, at the bottom of engine. 
Change oil every 8 hours for the first 20 hours 
and every 50 hours thereafter.
Applied oil : SAE#30 

(spring-summer)

SAE#20

 (autumn-winter)

SAE10W-30 

(cold district, below-10˚C)

*

Trouble if you don't observe. 
Burning of engine.

  

5. Drain water after use

Water inside may freeze at below 0˚C in winter and may damage pump. 

After use, drain water from drain plug before storing.

* Trouble if you don't observe. Breakage of pump casing.

  

6. Long storage

Discharge fuel from fuel tank and carburetor completely.

*

Trouble if you don't observe. Impossible to start engine in future. 
(Engine details, refer Engine Operation Manual.)

  

7. Prevent water hammer

Do not abruptly compress discharge hose during operation.

DRAIN PLUG

PRIMING 
PLUG

1

4

DRAIN OIL BOLT

PRIMING OIL PLUG

CAUTION

SAFETY PRECAUTIONS

Following information is very important for safety in handling

this product. Be sure to observe them.

Indicates an imminently hazardous situation which, 
if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, 
if not avoided, could result in death or serious injury.

IMPORTANT

PROHIBITED

ALERT

Indicates a potentially hazardous situation which, if not avoided, 
may result in minor or moderate injury, or property damage.

D A N G E R

WARNING

CAUTION

12 Kami-Hachinotsubo Kotari, Nagaokakyo City, Kyoto 617-8511 JAPAN
TEL.+81-75-954-6111 FAX.+81-75-954-6119

http://www.koshinpump.com

05-09  012047401tx

Check accessories provided

List of accessories provided are printed on the pump manual.

1

2-stroke engine

Fuel / Engine oil 

Please use 

"Unleaded gasoline mixed with lubricant

*

only.

*

Please use 

"2-stroke oil" only.

BEFORE USE

25

(          )

:1

(        )

Mixing
Ratio

2-stroke

oil

Unleaded

gasoline

Inflammable!! Avoid fire when refuel or maintenance.

WARNING

Inflammable!  Do not smoke when mixing fuel and refuel near open fire.

Any fuel spillage must be cleaned completely before starting the engine.

Stop engine and wait until the engine has cooled down before refueling.

Do not use old fuel over 30 days.  Fuel should be clean and fresh.
Fuel around the bottom of drum contains dirt, impurities and water.
Unused fuel in tank (if kept more than 30 days) may cause engine failure.

CAUTION

Thank you for choosing Koshin Hidels Pump.

This manual is prepared for your safety when 
operating pump.  Please read carefully and 
comprehend fully before use. 
(Wrong usage could cause injury or death.)

Please keep this manual handy for future 
reference.

Содержание HIDELS









Отзывы: