manualshive.com logo in svg

Korg TRITON Extreme, Руководство пользователя

Korg TRITON Extreme - мощный синтезатор с огромным набором звуков и возможностей. Для полного освоения инструмента важно иметь руководство пользователя. Скачайте бесплатное руководство на русском языке с manualshive.com. Узнайте все секреты работы с этим инновационным синтезатором.

Поделиться
Скачать
background image

20

Intensity to B

[–99…+99]

Specifies the depth and direction of the effect that the time-
varying changes created by the filter 1 EG will have on the 
filter 1B cutoff frequency (

☞

“Intensity to A”).

AMS (Filter EG AMS)

[Off, (EXT)]

Selects the source that will control the depth and direction of 
the effect that the time-varying changes produced by the fil-
ter 1 EG will have on the cutoff frequency of filters 1A and 
1B (“AMS List” 

☞

p.272).

Int to A (AMS Int. to A)

[–99…+99]

Specifies the depth and direction of the effect that “AMS 
(Filter EG AMS)” will have on filter 1A. For details on how 
this will apply (

☞

“Intensity to A”).

Int to B (AMS Int. to B)

[–99…+99]

Specifies the depth and direction of the effect that “AMS 
(Filter EG AMS)” will have on filter 1B. For details on how 
this will apply (

☞

“Intensity to A”).

The sum of the settings for “Velocity to A (B),” “Inten-
sity to A (B),” and “Int to A (B) (AMS Int. to A/B)” will 
determine the depth and direction of the effect pro-
duced by the filter EG.

3–2c: Filter A/B Modulation

Filter A:

AMS1 (Filter A AMS1)

[Off, (PEG, AEG, EXT)]

Selects the source that will control modulation of the filter 
1A cutoff frequency (“AMS List” 

☞

p.272).

Intensity (A AMS1 Intensity)

[–99…+99]

Specifies the depth and direction of the effect that “AMS1 
(Filter A AMS1)” will have.
When “AMS1 (Filter A AMS1)” is JS X, a positive (+) value 
for this parameter will cause the cutoff frequency to rise 
when the joystick is moved toward the right, and fall when 
the joystick is moved toward the left. With a negative (–) 
value

 for this parameter, the opposite will occur.

This value is added to the setting of the Filter A “Frequency 
(A Frequency)” (3–1b).

AMS2 (Filter A AMS2)

[Off, (PEG, AEG, EXT)]

Intensity (A AMS2 Intensity)

[–99…+99]

Selects “AMS2 (Filter A AMS2),” and specify the depth and 
direction of the effect that the selected source will have 
(

☞

“AMS1 (Filter A AMS1),” “Intensity (A AMS1 Inten-

sity)”).

Filter B:

This will be displayed when “Filter Type” (3–1a) is Low 
Pass & High Pass

.

Two alternate modulation sources can be used to modulate 
the cutoff frequency of filter 1B (

☞

“Filter A”).

▼

 3–2: Page Menu Command

☞

0–1A: Write Program, 1–1A: Copy Oscillator, 1–1B: Swap 
Oscillator

3–3: Filter1 LFO Mod.

Here you can use the filter 1 LFO to apply cyclic modulation 
to the cutoff frequency of filter 1 (for oscillator 1) to create 
cyclical changes in tone.

3–3a: LFO 1

Intensity to A (LFO1 Int. to A)

[–99…+99]

Specifies the depth and direction of the modulation that 
OSC1 LFO1 (set by “OSC1 LFO1” 5–1) will have on the cut-
off frequency of filter 1A.
Negative (–)

 settings will invert the phase.

Intensity to B (LFO1 Int. to B)

[–99…+99]

Specifies the depth and direction of the modulation that 
OSC1 LFO1 will have on the cutoff frequency of filter 1B 
(

☞

“Intensity to A (LFO1 Int. to A)”).

JS–Y Intensity to A (LFO1 JS–Y Int. to A)

[–99...+99]

The joystick can be moved in the –Y direction (toward your-
self) to control OSC1 LFO1, modulating the cutoff frequency 
of filter 1A.
This parameter specifies the depth and direction of control.
Higher settings

 of this parameter will cause OSC1 LFO1 to 

have a greater effect on filter 1 when you move the joystick 
in the –Y direction (toward yourself).

JS–Y Intensity to B (LFO1 JS–Y Int. to B)

[–99...+99]

The joystick can be moved in the –Y direction (toward your-
self) to control OSC1 LFO1, modulating the cutoff frequency 
of filter 1B.
This parameter specifies the depth and direction of control. 
(

☞

”JS–Y Intensity to A (LFO1 JS–Y Int. to A)”)

AMS (LFO1 AMS)

[Off, (PEG, FEG, AEG, KT, EXT)]

Selects a source that will control the depth and direction of 
cutoff frequency change for both filters 1A and 1B (“AMS 
List” 

☞

p.272).

Intensity to A (LFO1 AMS Int. to A)

[–99…+99]

Specifies the depth and direction of the effect that “AMS 
(LFO1 AMS)” will have on filter 1A.
For example if “AMS (LFO1 AMS)” is After Touch, higher set-
tings of this parameter will allow greater change to be applied 
to OSC1 LFO1 when you apply pressure to the keyboard.

Intensity to B (LFO1 AMS Int. to B)

[–99…+99]

Specifies the depth and direction of the effect that “AMS 
(LFO1 AMS)” will have on filter 1B (

☞

“Intensity to A (LFO1 

AMS Int. to A)”).

3–3

3–3a

3–3b

Change in cutoff

Low setting

High setting

Содержание TRITON Extreme



































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Extreme

V7 KW550 Quick Installation Manual preview
KW550
Бренд: V7 Страницы: 2
Razer DEATHSTALKER V2 Quick Start Manual preview
DEATHSTALKER V2
Бренд: Razer Страницы: 9
ZIPPY RF666C User Manual preview
RF666C
Бренд: ZIPPY Страницы: 5
Logitech K480 User Manual preview
K480
Бренд: Logitech Страницы: 19
Dell KB3121Wp/DGRFEO User Manual preview
KB3121Wp/DGRFEO
Бренд: Dell Страницы: 15
Dell KB700 User Manual preview
KB700
Бренд: Dell Страницы: 24
Dell KB5220W-C User Manual preview
KB5220W-C
Бренд: Dell Страницы: 10
Dell KW14M Quick Start Manual preview
KW14M
Бренд: Dell Страницы: 4
LABTEC Wireless Desktop Getting Started preview
Wireless Desktop
Бренд: LABTEC Страницы: 6
Yamaha PORTATONE PSR-E303 Service Manual preview
PORTATONE PSR-E303
Бренд: Yamaha Страницы: 35
Yamaha PortaTone PSR-8 Owner'S Manual preview
PortaTone PSR-8
Бренд: Yamaha Страницы: 28
Yamaha Portatone PSR-7 Owner'S Manual preview
Portatone PSR-7
Бренд: Yamaha Страницы: 28
Yamaha PortaTone PSR-80 Owner'S Manual preview
PortaTone PSR-80
Бренд: Yamaha Страницы: 35
Yamaha PortaTone PSR-64 Owner'S Manual preview
PortaTone PSR-64
Бренд: Yamaha Страницы: 28
Yamaha PortaTone PSR-70 Owner'S Manual preview
PortaTone PSR-70
Бренд: Yamaha Страницы: 36
Yamaha PortaTone PSR-6300 Owner'S Manual preview
PortaTone PSR-6300
Бренд: Yamaha Страницы: 52
Yamaha Portatone PSR-E213 Owner'S Manual preview
Portatone PSR-E213
Бренд: Yamaha Страницы: 74
Yamaha PortaTone PSR-6700 Advanced Features Manual preview
PortaTone PSR-6700
Бренд: Yamaha Страницы: 63

Бренды по названию

Популярные бренды

Загрузить еще бренды