Korg TRITON Extreme, Руководство пользователя

Страница: 294 / 354

283
Appendices
When one of the TRITON Extreme’s controllers is operated,
the corresponding or the assigned control change will be
transmitted. Pitch Bend messages will be transmitted only
when the joystick is moved in the X (horizontal) direction.
When Knob1...4 or SW1, 2 are selected for Assignable
Switch, or when Knob1...4 are selected for Assignable
Pedal, the corresponding MIDI control change message will
be transmitted according to the Knob1...4 B-Assign and
SW1/2 Assign settings of each mode.
The following page describes operation in each mode. (Only
control changes are explained here, but the same applies to
pitch bend.)
Program mode
When one of the TRITON Extreme’s controllers is operated,
a control change message will be transmitted on the global
MIDI channel (“MIDI Channel” Global P1: 1–1a).
If the B-mode of a REALTIME CONTROLS [1]–[4] knob
or the assignable pedal has been set to Master Volume,
the universal system exclusive message Master Volume
will be transmitted.
Combination mode
When one of the TRITON Extreme’s controllers is operated,
a control change message will be transmitted on the global
MIDI channel (“MIDI Channel” Global P1: 1–1a).
Simultaneously, the message will also be transmitted on the
MIDI channel (“MIDI Channel” Combination P2: 2–1a) of
any timbre whose “Status” (Combination P0: 0–1f, P2: 2–1a)
is EXT or EX2.
When one of the TRITON Extreme’s controllers is operated,
its effect will apply to any timbre whose “Status” is INT and
whose “MIDI Channel” setting is either Gch or the same as
the global MIDI channel.
In the case of Master Volume, the universal exclusive
message Master Volume will be transmitted only on the
global MIDI channel.
You can make settings for MIDI Filter (Combination P3)
to enable or disable control changes and controllers for
each timbre. When checked, the above operations will
be enabled.
Effect dynamic modulation can be controlled when the “Ctrl
Ch” (Combination P8: 8–3a, P9: 9–2a, 9–4a) setting for IFX1–
5, MFX1, 2, or MEQ is either set to Gch or to the same chan-
nel as the global MIDI channel. (In the case of All Routed,
control is possible on the MIDI channel of any routed tim-
bre.)
Sequencer mode
When one of the TRITON Extreme’s controllers is operated,
its effect will apply to the track 1–16 that is selected by
“Track Select” (Sequencer P0: 0–1e).
If the “Status” (Sequencer P2: 2–1a/2–2a) of the track
selected by “Track Select” is EXT, EX2, or BTH, a control
change message will be transmitted on the MIDI channel
specified by “MIDI Channel” (Sequencer P2: 2–1a/2a).
If the “Status” is INT or BTH, operating one of the TRITON
Extreme’s controllers will affect only that track. Simulta-
neously, the same effect will also apply to any track with the
same “MIDI Channel” setting.
In the case of Master Volume, the universal exclusive
message Master Volume will be transmitted.
You can make settings for MIDI Filter (Sequencer P3) to
enable
or disable control changes and controllers for
each track. When checked, the operations effective for a
“Status” of INT or BTH will be enabled. Tracks whose
“Status” is EXT, EX2, or BTH will transmit control
changes regardless of this setting.
Effect dynamic modulation can be controlled when the “Ctrl
Ch” (Sequencer P8: 8–4a, P9: 9–2a, 9–4a) setting for IFX1–5,
MFX1, 2, or MEQ matches the MIDI channel of the track
selected by “Track Select.” (In the case of All Routed, control
is possible on the MIDI channel of all routed tracks.)
If one of the TRITON Extreme’s controllers is operated dur-
ing realtime recording, the corresponding or assigned con-
trol change will be recorded.
Song Play mode
When one of the TRITON Extreme’s controllers is operated,
the effect will apply to the track 1–16 that is selected by
“Play (Track Select)” (Song Play P0: 0–1g).
If the “Status” (Song Play P1: 1–1a, 1–2a) of the track
selected by “Play (Track Select)” is either EXT or BTH, con-
trol change messages will be transmitted on the MIDI chan-
nel of the track (or in the case of Song Play mode, on MIDI
channels 1–16 for tracks 1–16).
If the “Status” is INT or BTH, operating one of the TRITON
Extreme’s controllers will affect that track.
In the case of Master Volume, the universal exclusive
message Master Volume will be transmitted.
Effect dynamic modulation can be controlled when the “Ctrl
Ch” (Song Play P8: 8–4a, P9: 9–2a, 9–4a) setting for IFX1–5,
MFX1, 2, or MEQ matches the MIDI channel of the track
selected by “Track Select.” (In the case of All Routed, control
is possible on the MIDI channel of all routed tracks.)
Sampling mode
When one of the TRITON Extreme’s controllers is operated,
a control change message will be transmitted on the global
MIDI channel (“MIDI Channel” Global P1: 1–1a).
In the case of Master Volume, the universal exclusive
message Master Volume will be transmitted.
It is not possible to make AMS settings in Sampling
mode.
MIDI transmission when the
TRITON Extreme’s controllers are
operated