manualshive.com logo in svg

Korg TRITON Extreme, Руководство пользователя, Страница: 293 / 354

Поделиться
Скачать
Korg TRITON Extreme Скачать руководство пользователя страница 293

282

You can assign the function that will be controlled by an 
assignable pedal (Korg XVP-10 or EXP-2 option) connected 
to the ASSIGNABLE PEDAL jack.

• This setting is made in Global P2: Controller “Foot Pedal 

Assign” (2–1a).

If you select a function that includes a CC#, that MIDI 
control change message will be transmitted each time 
the switch is turned on/off. (Off: 0, On: 127)
If you select Knob1...4, the MIDI control change mes-
sage specified by the Knob1...4 B-Assign settings will be 
transmitted each time the foot switch is turned on or 
off. (Off: 0, On: 127)

Foot Pedal Assign List

Foot Pedal Assign

Off

The connected pedal will not function.

Master Volume

Control the volume. Simultaneously, the universal exclusive message Master Volume [F0H, 7FH, nn, 04, 01, vv, mm, 
F7H] will be transmitted to control the volume of all timbres or tracks (while preserving the volume balance between tim-
bres or tracks).

Foot Pedal (CC#04)

Alternate Modulation or Effect Dynamic Modulation can be controlled. To control these, set “AMS” or “Dmod Src” to 
Pedal:CC#04.

Portamento Time 
(CC#05)

Control the speed at which portamento will change the pitch.

Volume (CC#07)

Control the volume of a Program, of a timbre in a Combination, or of a track in Sequencer/Song Play modes.

Post IFX Pan (CC#08)

Control the pan after passing through the insertion effect.
If Valve Force is On and “Placement” is set to Insert, this controls the panning of the output from Valve Force.

Pan (CC#10)

Control the pan of a Program, of a timbre in a Combination, or of a track in Sequencer/Song Play modes.

Expression (CC#11)

Control the volume of a Program, of a timbre in a Combination, or of a track in Sequencer/Song Play modes. Expression 
is multiplied with the Volume value to determine the actual volume level.

FX Control 1 (CC#12)

Control Effect Dynamic Modulation. To control this, set Dmod Src to FXCtrl1:#12.

FX Control 2 (CC#13)

Control Effect Dynamic Modulation. To control this, set Dmod Src to FXCtrl2:#13.

MFX Send 1 (CC#93)

Control the send level to master effect 1 (MFX1) from a Program, a timbre in a Combination, or a track in Sequencer/
Song Play modes. Simultaneously, this will also control the send level to master effect 1 (MFX1) from after the insertion 
effect of the matching MIDI channel.

MFX Send 2 (CC#91)

Control the send level to master effect 2 (MFX2) from a Program, a timbre in a Combination, or a track in Sequencer/
Song Play modes. Simultaneously, this will also control the send level to master effect 2 (MFX2) from after the insertion 
effect of the matching MIDI channel.

JS+Y (CC#01)

Pedal operation will control the effect produced by joystick movement in the +Y direction (Vertical upward).

JS–Y (CC#02)

Pedal operation will control the effect produced by joystick movement in the –Y direction (Vertical downward).

Ribbon (CC#16)

Pedal operation will control the effect of the ribbon controller.

Slider (CC#18)

Pedal operation will control the effect of the [VALUE] slider.

Knob 1...4

Pedal operation will control the effect of REALTIME CONTROLS knobs [1]–[4].

Содержание TRITON Extreme



































































































































































































































































































































































Отзывы:

Нет отзывов