Korg STAGEMAN 80, Руководство пользователя

Страница: 29 / 144

Appendix
29
Using a speaker stand
By mounting the STAGEMAN 80 unit on an optional
(separately sold) Korg ST-S80 speaker stand, you can use it at
an optimal height.
Caution when using a stand
In order to use this product correctly, you must carefully read
and observe the following cautions.
• Do not use the STAGEMAN 80 with any stand other than
the recommended stand. For details, refer to the Korg
website http://www.korg.com/.
• Use the speaker stand at a height no greater than 90 cm
(approximately 2' 95" see illustration).
If you use it at any greater height, the system may overturn,
causing personal injury or equipment damage.
• Extend the legs to 72 cm (approximately 2' 36") or more (see
illustration).
If the legs are extended less than this, the system may
overturn, causing personal injury or damaging your
equipment.
• Do not use the speaker stand in an unstable location or on a
tilted surface.
If you use the speaker stand in an unstable location, the
system may overturn, causing personal injury or equipment
damage.
• Take care that all cables connected to the STAGEMAN 80
are routed appropriately to avoid tangling.
If a person’s foot becomes caught in a cable, the system may
overturn, causing personal injury or equipment damage.
• Do not place any object on a STAGEMAN 80 that is
mounted on a speaker stand.
Such objects may fall or cause the stand to overturn,
causing personal injury or equipment damage.
Assembling the stand and mounting the
STAGEMAN 80
72 cm or more
Upper
pipe
Knob 2
Tripod
Stay
Knob 1
90 cm or less
Stopper
1. Loosen knob 1 and open the tripod sufficiently.
Open the stand all the way until the stays are horizontal.
Make sure that the legs are at least 72 cm (approximately 2’
36”) apart.
If the legs are not sufficiently far apart, the stand may
overturn.
2. Firmly tighten knob 1.
3. Loosen knob 2 and extend the upper pipe.
4. Insert the stopper into the hole of the upper pipe.
Take care not to pinch your fingers.
The stopper must be inserted when you use the system.
5. Lower the upper pipe until it stops at the stopper.
6. Firmly tighten knob 2.
7. Mount the STAGEMAN 80 on the upper pipe.
Insert the upper pipe of the ST-S80 into the mounting
socket located on the bottom of the STAGEMAN 80 (the
location indicated by the arrow in the illustration below).
Caution when mounting
Observe the following cautions when mounting the
STAGEMAN 80 on a speaker stand.
• You must obtain the help of at least one other person when
mounting the STAGEMAN 80 on a stand.
• Take care not to pinch your fingers.
• Do not tilt the stand with the STAGEMAN 80 mounted on
it.
• Never adjust the height of the stand while the
STAGEMAN 80 is mounted on it.
• Make sure that the height from the floor to the bottom of
the STAGEMAN 80 (see illustration at left) is no more than
90 cm (approximately 2’ 95”).