Quick Start
17
Using the recorder function
(Recorder mode)
The STAGEMAN 80 has a built-in recorder that can record a
variety of input sources. You can use this in a variety of ways,
such as for reviewing your own personal practice sessions, or
for keeping a record of your musical ideas.
Here we explain recording in Recorder mode. The content
that you can record differs as follows depending on the mode.
•
Rhythm mode:
Your performance is recorded along with
the rhythm style playback.
•
Recorder mode:
Your performance is recorded. Your
performance can also be overdubbed onto the recorded
song data.
•
Player mode:
Your performance is recorded along with the
playback of the audio file.
Note:
The BASS, TREBLE, and ACOUSTAGE effects cannot
be recorded. The REVERB effect applied to the input audio
from the MIC IN, INPUT 1, and 2 jacks can be recorded.
The recorded data is saved on an SD card inserted in the
SD card slot. In order to record, insert the SD card into the
SD card slot before you turn on the power (See page 10
“Inserting or removing an SD card”).
Playing back the recorded performance
You’ll use Recorder mode to play back the performance that
you recorded on the STAGEMAN 80.
1.
Press the [RECORDER] button to enter Recorder mode
(the button lights).
2.
Use the [F1] or [F2] button to select the song number that
you want to play.
3. Use the RHYTHM/PLAY knob to adjust the playback
volume of the recorded performance.
If you want the recorded sound to play back at the same
volume as when it was recorded, turn the RHYTHM/
PLAY knob all the way to the right.
4. Press the
[
]
button to start playback.
5. Press the
[
]
button to stop playback. To return to
the beginning of the song, press the [VAR] button.
Recording your performance
2
2
3
6,8
1
4
6
5
1.
Press the [RECORDER] button to enter Recorder mode
(the button lights up).
2. Connect the mic or instrument that you want to record,
and adjust the volume.
See page 13 “Connecting and playing instruments”
3.
Select a new song. Press the [F2] button until a song
number blinks in the display.
Blinking numbers are new songs. Numbers that remain lit
up are previously-recorded songs.
Tip:
On the STAGEMAN 80, recorded data is called “song
data,” and is handled in units called “songs.”
4. If you want to hear a metronome tone as a guide while
you record, press the [Metronome] button to turn on the
metronome function.
Use the [(1) 8 BEAT1]–[(16) BLUES2] buttons to select
the sound of the metronome (see page 26 “Voice name
By default, the metronome’s time signature is set to 4/4.
If you want to change the time signature, hold down the
[Metronome] button and turn the VALUE dial.
You can select the time signature from the 9 choices in
the range 3/4, 4/4, 4/5, 7/4, 5/8, 6/8, 7/8, 9/8, and 12/8. The
display shows the time signature value.
Time signature display example: 4/4 time signature:
“04:04”
5.
Press the [Count Start] button to turn on the count start
function (the button blinks).
6. To start recording, press the [
] button and then the
[
] button.
A two-measure count is sounded, and then recording
starts (the [Count Start] button goes dark).
The song position in the display changes to a time
indication.
7. Play your instrument.
8.
When you’ve finished performing, press the
[
]
button to stop recording.
Overdubbing onto a recorded song
Overdubbing is the process of recording additional material
onto a previously-recorded song.
1
2
2
2
2
2,3,5
2
2
1.
Use the [F1] or [F2] button to select the song that you
want to overdub.
Содержание STAGEMAN 80
Страница 1: ...EFGSJ 3 ...
Страница 2: ......
