manualshive.com logo in svg

Korg Soundlink DRS OASYS PCI, Руководство пользователя

Поделиться
Скачать
Korg Soundlink DRS OASYS PCI Скачать руководство пользователя страница 66

Managing Resources

Using the OASYS PCI

62

OASYS PCI

English

Disable meters

If things are running very tight with CPU processing power, you can disable 
meters entirely. To do this:

1.

Select Disable Meters from the File menu.

If you pull down the File menu again, you’ll notice that the item’s name has 
changed to Enable meters. To re-enable the meters:

1.

Select Enable Meters from the File menu.

MIDI Parameter Changes and Control Panel objects

On-screen Control Panel objects (sliders, knobs, etc.) can be con

fi

gured to move in 

response to received MIDI System Exclusive Parameter Change messages. This is a 
convenient feature, but whenever a knob moves, it adds a small amount of 
processing overhead to the host CPU. 
If you wish to optimize host CPU processor usage, you can disable this feature. To 
do so:

1.

Select Preferences from the Edit menu.

The OASYS PCI Preferences window will appear.

2.

Press the MIDI/Global tab.

The MIDI/Global parameters will appear.

3.

Turn off the Update Control Panel from MIDI checkbox.

4.

Press the Save button to store the edited preferences.

Disable System Exclusive messages, if not in use

Sending and receiving MIDI System Exclusive Parameter Change messages takes 
a small amount of CPU processing power. If you don’t need this feature, you can 
disable these messages completely. To do so:

1.

Select Preferences from the Edit menu.

The OASYS PCI Preferences window will appear.

2.

Press the MIDI/Global tab.

The MIDI/Global parameters will appear.

3.

Turn off the Send MIDI Parameter Change Messages and Receive MIDI 
Parameter Change Messages checkboxes.

4.

Press the Save button to store the edited preferences.

Close unnecessary windows

Mixer window meter updates, graphic display of fader and knob automation, and 
graphic display of Control Panel automation all take up a certain amount of CPU 
processing power–but only when the window showing the meter or automation is 
open. 

Содержание Soundlink DRS OASYS PCI





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды