Korg Pa3X 61-keys, Руководство пользователя

Страница: 21 / 276

17
Overview
Front Panel
Introd
uction
Ensemble
The Ensemble function automatically harmonizes the right hand
melody.
ENSEMBLE
This button turns the Ensemble function on or off. When on, the
right-hand melody is harmonized with the left-hand chords.
Note: The Ensemble function works only when the keyboard is in
SPLIT mode, and the LOWER Chord Scan mode is selected.
You can jump to the Style Play > Ensemble page by
keeping SHIFT pressed, and pressing the ENSEMBLE button.
Performance Select Section
Use these buttons to select a Performance.
STYLE CHANGE
This button turns the Style Change function on or off.
On When you select a Performance, the Style might
change, according to which Style is memorized
onto the Performance.
Off When you select a Performance, the Style and
Style track settings remain unchanged. Only Key-
board track settings are changed.
PERFORMANCE SELECT section
Use these buttons to open the Performance Select window, and
select a Performance. See “Performance Select window” on
page 104.
Each Performance bank contains four pages, each with up to
eight Performances. Repeatedly press a PERFORMANCE
SELECT button to cycle between the available pages.
All Performances can be freely customized. See the “Style Play
operating mode” for more information.
If you keep the SHIFT button pressed, and press one of
the buttons of this section, the “Write Performance” window
appears in the display, and you can save the current track set-
tings into a Performance (see “Write Performance dialog box”
on page 138).
Chord Scan and Keyboard Split
Use these buttons to choose chord recognition and keyboard
splitting.
CHORD SCAN section
In Style Play, Song Play and Sequencer-Backing Sequence mode,
use these buttons to define the way chords are recognized.
LOWER Chords are detected below the split point. The
number of notes you should play to form a chord
is defined by the Chord Scan Mode parameter
(see “Chord Recognition Mode” on page 135).
UPPER Chords are detected above the split point. You
must always play three or more notes to let the
arranger recognize a chord.
FULL (both LEDs On)
Chords are detected on the full keyboard range.
You must always play three or more notes to let
the arranger recognize a chord. (You can use this
mode even when the Split keyboard mode is
selected). The “Fingered 3” Chord Recognition
Mode is automatically selected (see “Chord Rec-
ognition Mode” on page 135).
OFF No chords detected. After pressing START/STOP,
only the Drum and Percussion accompaniment
tracks will play.
SPLIT
In Style Play, Song Play and Sequencer-Backing Sequence mode,
use this button to define how the four Keyboard tracks are posi-
tioned on the keyboard, and how chords are recognized by the
arranger.
Note: One of the Chord Scan options must be selected for the
accompaniment to play.
On The Lower track plays below the split point, while
the Upper 1, Upper 2 and Upper 3 tracks play
above it. This is called the
Split keyboard mode.
By default, turning on the Split mode automati-
cally selects the Lower chord scanning mode (see
above). In this mode, chords are detected below
the split point. The number of notes you should
play to form a chord is defined by the “Chord
Recognition Mode” parameter (see page 135).
SB
Gbl
Set
SB
SB
SB