Korg Pa3X 61-keys, Руководство пользователя

Страница: 134 / 276

130
Style Play operating mode
Keyboard/Ensemble: Keyboard Control 1
Easy Sound Edit parameters
Use these knobs to adjust the offset value.
-64…0…+63 Offset value. ‘0’ means no change to the original value
memorized in the Sound, while any other value
means a decrease or increase to the original value.
Portamento knob and switch
Use the Time knob to adjust the speed of the portamento (a slide
between notes). Check the box to turn portamento on, or
uncheck it to turn portamento off.
Select
Use these buttons to select the track to edit. The button corre-
sponding to the selected track turns green.
Reset Track
Touch this button to reset all changes to Sound parameters in the
selected track.
Reset All Tracks
Touch this button to reset all changes to Sound parameters in all
tracks.
Play/Mute icon
Track’s play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
How to adjust sound parameters for a single
Sound
Here is a quick example of the use of the Easy Sound Edit func-
tion.
1. If needed, while in this page press TRACK SELECT to see
Keyboard tracks.
2. Touch the “Select” button, in the display, corresponding to
the Upper 1 track.
3. While playing on the keyboard to hear the Sound, select
the Cutoff knob, and use VALUE controls to turn its value
completely off.
You’ll notice how the filter progressively cuts out high fre-
quencies, making the sound darker and mellower.
4.
Touch the Reset Track button in the display to recall the
original Cutoff value.
Keyboard/Ensemble: Keyboard Control 1
This page lets you enable/disable the Damper and Expression
pedals, plus the Joystick, for each of the Keyboard tracks.
Damper
On When you press the Damper pedal and release
the keys, the track’s sound is kept sustained.
Off The Damper pedal is not active on any track set
to this status.
Joystick X
This enables/disables the left/right movement of the Joystick
(Pitch Bend, and sometimes a Sound parameter’s control; for
Pitch Bend settings, see “Mixer/Tuning: Tuning” on page 123).
Joystick Y
This enables/disables the front/rear movement of the Joystick
(Y+: Modulation, and sometimes a different Sound parameter’s
control; Y-: Various controls, or non-active).
Expression
This parameter allows you to switch the Expression control on/
off on each individual Keyboard track. The Expression control is
a relative level control, always subtracted from the Volume value
of the track.
As an example, imagine you have a Piano sound assigned to
Upper 1, and a Strings sound assigned to Upper 2. If you turn
the Expression switch on on Upper 2, and off on Upper 1, you
can use a continuous pedal to control only the Strings’ volume,
while the Piano remains unchanged.
To program a pedal or Assignable Slider to act as an Expression
control, see “Controllers: Pedal/Switch” on page 208 or “Con-
trollers: Assignable Sliders” on page 209. You can only assign this
function to a volume-type pedal, not to a switch-type one.
Assign the “KB Expression” option to the pedal or Assignable
Slider, then select Write Global-Global Setup from the page
menu to save the setting to the Global.
Sound parameters Meaning
Attack Attack time. This is the time during which the sound
goes from zero (at the moment when you strike a
key) to it’s maximum level.
Decay Decay time. Time to go from the final Attack level to
the beginning of the Sustain.
Release Release time. This is the time during which the
sound goes from the sustaining phase, to zero. The
Release is triggered by releasing a key.
Cutoff Filter cutoff. This sets the sound brightness.
Resonance Use the Filter Resonance to boost the cutoff fre-
quency.
LFO Depth Intensity of the Vibrato (LFO).
LFO Speed Speed of the Vibrato (LFO).
LFO Delay Delay time before the Vibrato (LFO) begins, after the
sound starts.
Set
Set
Set