Korg Pa3X 61-keys Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 276

Korg Pa3X 61-keys Скачать руководство пользователя страница 109

105

Selecting elements

Style Select window

Re

fe

rence

Style Select window

Touch the Style area whereas it appears in the display, or one of
the STYLE SELECT buttons on the control panel, to open the
Style Select window. Use the STYLE SELECT buttons to go
directly to the selected bank.

Press EXIT to exit from this page and go back to the previous
page without selecting any Style.

Note:

Depending on the status of the “Auto Select” parameter (see

page 207), a Style may be immediately selected when pressing one
of the STYLE SELECT buttons. The latest selected Style for that
bank will be selected.

Style sets

Selected set of Styles.

Factory

Styles are Styles supplied as stan-

dard.

Fav/User

are

Favorite

Styles (locations for custom-made

Styles with editable names) and

User

Styles (locations for cus-

tom-made Styles with fixed names).

Side tabs (banks)

Use these tabs to select a bank of Styles. Each Factory tab corre-
sponds to one of the STYLE SELECT buttons on the control
panel. Favorite tabs can be renamed (see “Renaming the Favorite
banks” on page 140).

Lower tabs (pages)

Use these tabs to select one of the available pages in the selected
bank.

If you press again the same STYLE SELECT button on the con-
trol panel, the next page in the same bank is selected. This way,
you do not need to touch one of the corresponding tabs in the
display in order to select a different page.

Styles

Touch one of these buttons in the display to select a Style. Unless
the “Display Hold” parameter (see page 207) is turned on, the
window automatically closes shortly after you select a Style.

After selecting a Style from this window, and another Style is
playing, the name of the new Style name begins to flash, mean-
ing it is ready to start playing at the beginning of the next mea-
sure.

Style Select page menu

Touch the page menu icon to open the menu. Touch a command
to select it. Touch anywhere in the display to close the menu
without selecting a command.

Rename Favorite bank

Choose this command from the page menu, and assign the
Favorite Style banks any name you like.

The assigned name can be spanned over two lines, by separating
them with the paragraph character (¶). For example, to write
“World Music” on two lines, enter “World¶Music”.

In any case, the Pa3X will try to automatically put on two lines
two words separated by two spaces.

Be careful not to write words exceeding the width of the side tabs
of the Style Select window.

Pad Select window

Touch the Pad area whereas it appears in the display, to open the
Pad Select window.

Press EXIT to exit from this page and go back to the previous
page without selecting any Pad.

Side tabs (banks)

Lower tabs (pages)

Type of Styles

Styles

Side tabs (banks)

Lower tabs (pages)

Type of Pads

Pads

«
...
107
108
109
110
111
...
»

Содержание Pa3X 61-keys





















































































































































































































































































Отзывы:

Нет отзывов