Korg PA1X Скачать руководство пользователя страница 57

Страница: 57 / 424

Song Play

Turning Song tracks on/off

Quick Guide

•

Touch each track’s channel strip, to see each track’s detail in the Track
Info line.

•

Alternatively, you can see the Sound assigned to each track in the Sound
area of the Track 1-8 and Track 9-16 views.

Turning Song tracks on/off

Note:

These changes

will not be saved to the
Song. To save changes,
edit the Song in
Sequencer mode.

During playback, you may wish to mute one or more tracks, for example to sing along with the Song,
or play an instrumental part live on the keyboard.

Muting/unmuting Song tracks works exactly as with Style tracks. See “Turning Style tracks on/off ” on
page 46 for more information.

Selected track

Assigned Sound. Press it to
open the Sound Select win-
dow.

Sound bank

Program Change (if activated -
see “Show Program Change
number” on page 234)

Octave Transpose

Sounds. Names are abbreviated,
to fit the limited space. Press to
open the Sound Select window.

Содержание PA1X









































































































































































































































































































































































































































Результаты поиска

Содержание PA1X

Отзывы:

Бренды по названию

Популярные бренды

Korg PA1X, Руководство пользователя

Результаты поиска

Содержание PA1X

Отзывы:

Бренды по названию

Популярные бренды