manualshive.com logo in svg

Korg PA1X, Руководство пользователя

Поделиться
Скачать
Korg PA1X Скачать руководство пользователя страница 269

265

Disk edit mode

Save

Reference

Save

In this page, you can save User data from the internal memory to
a disk. You can save single files, banks, or all the User files of the
internal memory (i.e., the SSD device).

Note:

 While in this page, only data allowed for saving are shown.

All other files are hidden.

Here are the various types of files contained in the internal
memory:

Saving the full memory content

You can save the full memory content with a single operation.

1.  

If saving to a floppy disk, insert the disk into the disk drive.

2.

The full content (“All”) of the internal memory is already
shown. Select it, and press Save to confirm the selection.
The list of files of the target device is shown.

3.

If needed, select a different target device, by using the
Device pop-up menu. When the target device is selected, its
content will appear in the display.

4.

At this point, you can:

• Press the New SET button and create a new “.SET” folder
(see “Creating a new “.SET” folder” on page 268), or

• Select an existing “.SET” folder.

5.

Press Save to confirm. A dialog box appears, asking you to
select the type of data to save:

In the above dialog box, check all data type you wish to save
to disk.

6.

Press OK to confirm, or Cancel to abort.

Warning:

 After confirming, all data of the selected type in

the target folder is deleted.

The file/folder 
type…

…contains…

…and will create on 
disk…

All

All the User data in 
memory

A .SET folder

Style

The USER 01-03 Styles

A STYLE folder inside 
a .SET folder

Sound

The USER Sounds and 
Drum Kits

A SOUNDS folder 
inside a .SET folder

Perform (Per-
formances)

The Performances

A PERFORM folder 
inside a .SET folder

SongBook

The SongBook database

A SONGBOOK folder 
inside a .SET folder

PCM

All the Multisamples 
contained in the SSD, 
and the Samples con-
tained in RAM

A PCM folder inside a 
.SET folder

Global

The Global. All parame-

ters marked with 

 

through the various 
chapters are saved in the 
Global. Voice Processor 
presets are saved too.

A GLOBAL folder 
inside a .SET folder. A 
.VOC file will be cre-
ated inside the GLO-
BAL folder, containing 
Voice Processor pre-
sets

Содержание PA1X









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды