manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 581 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 581

571

SAMPLING mode

Sampling Overview

The NAUTILUS can sample external audio from the analog, 
USB inputs, at 48 kHz 16-bit resolution (or 24-bit to drive), 
in mono or stereo. You can record samples into RAM, or 
sample directly to drive.

You can also digitally resample the complete sound of a 
Program, Combi, or Song, played live or sequenced, 
including any effects and Arpeggiator-generated events.

Once a sample is loaded into SAMPLING mode, you can 
use it directly in Drum Kits, or make it into a Multisample 
and use it anywhere that you use ROM Multisamples, 
including HD-1, STR-1, or MOD-7 Programs and Wave 
Sequences. 

Once saved to drive, you can load your custom sounds as 
User Sample Banks, with access to Virtual Memory. For 
more information, see “User Sample Banks” on page 149 of 
the OG.

Sampling to RAM, or direct to drive

Sampling and RAM

The NAUTILUS comes with 3GB of RAM pre-installed.

 

Approximately 1 GB of this RAM is used by the operating 
system and ROM sample data. The remainder is shared 
between the samples in EXs, User Sample Banks, and 
SAMPLING mode.

This means that the size of the currently loaded EXs and 
User Sample Banks trades off against the memory available 
for SAMPLING mode. The more space used by EXs and 
User Sample Banks, the less is available for SAMPLING 
mode.

The amount of sampling time depends on the amount of free 
RAM, as shown below.

You can check the amount of available sample RAM on the 
Recording page; for more details, see “0–1f: Free Sample 
Memory/Locations” on page 579.

Free RAM and approximate sampling times

Sampling to drive

You can sample directly to drive, creating a WAVE file. This 
lets you record up to 80 minutes continuously, in either 
mono or stereo (mono: approximately 440 MB, stereo: 
approximately 879 MB).

As long as they fit into the available RAM, these WAVE files 
can then be loaded into SAMPLING mode and used in HD-
1, STR-1, or MOD-7 Programs, Drum Kits, or Wave 
Sequences. 

WAVE files can also be used in audio tracks of the 
sequencer. For more information, see “Audio recording” on 
page 89 of the OG.

When sampling to drive, you can choose to record at either 
16- or 24-bit resolution. 24-bit files can be used at full 
resolution in audio tracks; when loaded into SAMPLING 
mode, they are automatically converted to 16-bit data.

Do not turn off the power for at least 10 seconds after 
sampling to drive. This allows the system time to 
complete the process.

Free RAM

Approximate Sampling Time (min:sec)

Mono

Stereo

16 MB

2:54

1:27

64 MB

11:39

5:49

128 MB

23:18

11:39

256 MB

46:36

23:18

512 MB

93:12

46:36

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов