56
G: SyncCtrl ................................. [OFF, CC#00...CC#95]
Select the MIDI control change number that will be transmit-
ted from the MIDI OUT connector when the arpeggiator
sends a note-on. (With the factory settings, this is CC#90.)
If the specified number has been specified for another
key or knob, an “*” will be displayed in the LCD screen
beside “MIDI FILTER.”
H: TimbreSelect........................... [OFF, CC#00...CC#95]
Here you can select the control change number that will be
output from the MIDI OUT connector when a timbre is
selected in Program Play mode or LCD Edit mode. (With the
factory settings, this is CC#95.)
If the specified number has been specified for another
key or knob, an “*” will be displayed in the LCD screen
beside “MIDI FILTER.”
A: Ctrl Change
Here you can assign a MIDI control change number (CC#) to
each front panel knob.
When you operate a knob or key in Program Play mode or
LCD Edit mode, the assigned control change will be trans-
mitted or received.
Knob .................................... [Portamento...Mod Depth]
Select the knob or key.
Ctrl#........................................... [OFF, CC#00...CC#95]
Select the MIDI control change number (CC#).
If the specified number has been specified for another
key or knob, an “*” will be displayed in the LCD screen
beside “CTRL CHANGE.”
A: A.Pedal........................................[Volume...FootPdl]
Select the function of the pedal that is connected to the
ASSIGNABLE PEDAL jack. (With the factory settings, this is
Exp Pdl
.)
Volume
MIDI control change MIDI Volume (CC#07) will be
assigned.
You can use a pedal to control the volume level of the pro-
gram. This is used mainly as a fader-style level control.
Pedal operations will also transmit [Bn, 07, vv] (CC#07)
messages from the MIDI OUT connector.
For a vocoder program, this controls the volume level of
the internal tone generator of the carrier.
If the control change map (Page 5: CTRL CHANGE)
Amp Level has been set to CC#07, this will control the
volume level.
Exp Pdl
MIDI control change MIDI Expression (CC#11) will be
assigned.
You can use a pedal to control the volume level. This is
used mainly to add dynamic performance expression to
the level. Pedal operations will also transmit [Bn, 0B, vv]
(CC#11) messages from the MIDI IN connector.
Panpot
MIDI control change MIDI Panpot (CC#10) will be
assigned.
You can use a pedal to control the panpot of the program.
Pedal operations will also transmit [Bn, 0A, vv] (CC#10)
messages from the MIDI IN connector.
For a vocoder program, this controls the volume level of
the audio that is output directly from the AUDIO IN 2
jack (Direct Level).
If the control change map (Page 5: CTRL CHANGE)
Panpot has been set to CC#10, this will control panpot
(or Direct Level).
A.Touch
After Touch will be assigned. Operating the pedal will
transmit Channel Pressure [Dn, vv] messages from the
MIDI OUT connector. If the Global mode parameters Page
3D: MIDI “MIDI 1” or Page 3E: MIDI “MIDI 2” are set to
A.Touch
, this can be used as a modulation source.
BreathC
MIDI control change MIDI Breath Control (CC#02) will be
assigned.
Operating the pedal will transmit [Bn, 02, vv] messages
from the MIDI OUT connector.
If the Global mode parameters Page 3D: MIDI “MIDI 1” or
Page 3E: MIDI “MIDI 2” are set to CC#02, this can be used
as a modulation source.
FootPdl
MIDI control change Foot Pedal (CC#04) will be assigned.
Operating the pedal will transmit [Bn, 04, vv] messages
from the MIDI OUT connector.
If the Global mode parameters Page 3D: MIDI “MIDI 1” or
Page 3E: MIDI “MIDI 2” are set to CC#04, this can be used
as a modulation source.
B: A.SwFunc................................... [Damper...Arpegio]
Select the function of the pedal switch connected to the
ASSIGNABLE SWITCH jack. (With the factory settings, this
is Damper.)
Damper
The pedal switch will function as a damper pedal.
Prog +/–
The pedal switch will select programs consecutively.
Oct +/–
The pedal switch will switch octaves.
This lets you use the pedal to perform the functions of the
front panel OCTAVE (or BANK/OCTAVE) [UP], [DOWN]
keys.
On the MS2000R, this is effective only for a perfor-
mance using the SELECT [1]–[16] keys.
Portmnt
The pedal switch will function as a portamento on/off
switch.
Page5: CTRL CHANGE
Page6: PEDAL&SW
5A CTRL CHANGE
Portament :CC#05
knob
Ctrl#
