Korg minilogue, Руководство пользователя

Страница: 8 / 58

8
Playing Programs and Sequences
Selecting and Playing a Program
The minilogue comes equipped with 200 Programs. Of those, 100 are ready-to-
play preset Programs and 100 locations are available to save your own sounds
and custom edits.
Each Program includes settings for the sound, as well as sequence data and
Voice mode settings.
1.
Enter the Play mode.
When the minilogue is turned on, it will automatically enter the Play mode.
In the Play mode, verify that all of the EDIT MODE and 1–8/9–16 buttons
on the front panel are unlit.
TIP
If the EDIT MODE button or the 1–8/9–
16 button is lit, press the EXIT button.
The PLAY or REC buttons will light to
indicate when the sequence data saved
in a Program is being played back or is
recording. You can still select other Pro -
grams in this state, but press the PLAY
button if you wish to stop the Sequencer.
2.
Turn the PROGRAM/VALUE knob to select a Program.
The display will indicate the Program name and number.
The minilogue comes with 100 preset Programs (001–100) as part of the fac -
tory preload data. These preset Programs are instantly accessible and ready
for you to enjoy. For details, refer to “Program List” (p. 54).
TIP
Hold down the SHIFT button while turning the PROGRAM/VALUE
knob to skip through the Program List in increments of 10.
TIP
In addition to showing Program name and number, the display can
also be used as an oscilloscope , to show the electrical signals created
by the waveform of the sound. For details on the display, refer to “Os -
cilloscope” (p. 45).
2
1
Make sure they are unlit.