Korg microARRANGER, Руководство пользователя

Страница: 210 / 244

208 Effects
Reverb
Reverb effects
These effects simulate the ambience of reverberation in
concert halls.
052: Rev. Hall
This hall ‐ type reverb simulates the reverberation of
mid ‐ size concert halls or ensemble halls.
053: RevSmthHall

(Smooth Hall)
This hall ‐ type reverb simulates the reverberation of
larger halls and stadiums, and creates a smooth release.
054: RevWetPlate
This plate reverb simulates warm (dense) reverbera ‐
tion.
055: RevDryPlate
This plate reverb simulates dry (light) reverberation.
b: Pre Delay [msec], b: Pre Delay Thru [%]
The “Pre Delay” sets the delay time to the reverb input, allow-
ing you to control spaciousness.
Using the “Pre Delay Thru” parameter, you can mix the dry
sound without delay, emphasizing the attack of the sound.
056: Rev. Room
This room ‐ type reverb emphasizes the early reflections
that make the sound tighter. Changing the balance
between the early reflections and reverb sound allows
you to simulate nuances, such as the type of walls of a
room.
057: R.BriteRoom
This room ‐ type reverb emphasizes the early reflections
that make the sound brighter. See 056: Reverb Room.
c: ER Level, d: Reverb Level
These parameters set the early reflection level and reverb
level.
Changing these parameter values allows you to simulate the
type of walls in the room. That is, a larger “ER Level” simu-
lates a hard wall, and a larger “Reverb Level” simulates a soft
wall.
REVERB
a
Reverb Time [sec]
Sets the reverberation time 0.1...10.0sec
High Damp [%]
Sets the damping amount in the high range 0...100%
b
Pre Delay [msec]
Sets the delay time from the dry sound 0...200msec

Pre Delay Thru [%]
Sets the mix ratio of non-delay sound 0...100%

c
EQ Trim
Table , “Sets the EQ input level,” on page 176 0...100
d
Pre LEQ Gain [dB]
Table , “Sets the gain of Low EQ,” on page 176 –15...+15dB
Pre HEQ Gain [dB]
Table , “Sets the gain of High EQ,” on page 176 –15...+15dB
e
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175 –100...+100
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
LEQ HEQ
Pre Delay
Reverb
Pre Delay Thru
Reverb - Hall / Plate Type
Time
Level
Louder
Dry
Reverb
Pre Delay Thru
Pre Delay
Reverb Time
a
Reverb Time [sec]
Sets the reverberation time 0.1...3.0sec
High Damp [%]
Sets the damping amount in the high range 0...100%
b
Pre Delay [msec]
Sets the delay time from the dry sound 0...200msec

Fx:052
Pre Delay Thru [%]
Sets the mix ratio of non-delay sound 0...100%
 Fx:052
c
ER Level
Sets the level of early reflections 0...100

d
Reverb Level
Sets the reverberation level 0...100

e
EQ Trim
Table , “Sets the EQ input level,” on page 176 0...100
f
Pre LEQ Gain [dB]
Table , “Sets the gain of Low EQ,” on page 176 –15...+15dB
Pre HEQ Gain [dB]
Table , “Sets the gain of High EQ,” on page 176 –15...+15dB
g
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175 –100...+100
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
LEQ HEQ
Pre Delay
Reverb
Reverb Level
ER Level
ER Level
Pre Delay Thru
ERs
ERs
Reverb - Room Type
Time
Level
Louder
ER
(Early Reflections) Dry
Reverb
Pre Delay Thru
Pre Delay Reverb Time