164
Foot Switch Assign
You can assign the function of an assignable switch (sepa-
rately sold Korg PS-1 option) connected to the ASSIGN-
ABLE SWITCH jack.
• This setting is made in GLOBAL 0: System Foot page
“Foot SW Assign” (0–3a).
If you select a function that includes a CC#, that MIDI
control change message will be transmitted each time
the switch is turned on/off. (Off: 0, On: 127)
Foot Switch Assign List
Portamento SW (CC#65)
When the “Mode (Oscillator Mode)” (PROG 1–1a) is Single,
turning the switch on will apply portamento regardless of
the “Enable (Porta. Enable)” (PROG 2–1c) setting, and turn-
ing the switch off will not apply portamento.
If “Mode (Oscillator Mode)” is Double, and if the “Enable
(Porta. Enable)” setting is the same for OSC1 and 2 (i.e.,
Enable
or Disable for both OSC1 and 2), then portamento
will be applied to OSC1 and 2 when the switch is turned on,
and portamento will not be applied to OSC1 and 2 when the
switch is turned off.
If the “Enable (Porta. Enable)” setting is different for OSC1
and 2 (i.e., OSC1 is Enable and OSC2 is Disable, or OSC1 is
Disable
and OSC2 is Enable), then portamento will be
applied to the OSC whose setting is Enable when the switch
is turned on, and portamento will be applied to neither OSC
when the switch is turned off.
Even if you set “Foot SW Assign” to Knob1...4, you can-
not use a connected foot switch to control the REAL-
TIME CONTROLS C-mode arpeggiator effect. Nor will
it transmit MIDI control messages.
Tap tempo control can be used whenever the [TEMPO]
knob can be operated.
Off
The connected foot switch will not function.
Foot SW (CC#82)
Alternate Modulation or Effect Dynamic Modulation can be controlled. To control these, select Foot
SW:#82 for “AMS” or FSW#82 for “Dmod Src.”
Portamento SW (CC#65)
Control portamento on/off.
Sostenuto (CC#66)
Control the sostenuto effect (which holds only the keys (Note No.) that were being held at the
moment that the pedal switch was turned on).
Soft (CC#67)
Turn the soft pedal effect on/off.
Arpeggio SW
Turn the arpeggiator on/off. The NRPN message [Bn 63 00 Bn 62 02 Bn 06 00 (off) or 7F (on)] will
be transmitted each time this is turned on/off.
Program Up
The switch can be used to select programs or combinations. When in PROG 0: Play, the program
that follows the currently selected program will be selected. When in COMBI 0: Play, the combina-
tion that follows the currently selected combination will be selected. Simultaneously, a Bank Select
message and Program Change message will be transmitted.
Program Down
The switch can be used to select programs or combinations. When in PROG 0: Play, the program
that precedes the currently selected program will be selected. When in COMBI 0: Play, the combi-
nation that precedes the currently selected combination will be selected. Simultaneously, a Bank
Select message and Program Change message will be transmitted.
X50: Mod.Wheel (CC#01)/microX: JS+Y
(CC#01)
X50: The switch will control the effect of the “up” direction of the [MOD] wheel.
microX: The switch will control the effect of the +Y (up) direction of the joystick.
JS–Y (CC#02)
X50: The switch will control Alternate Modulation or Effect Dynamic Modulation. To control these,
choose JS–Y#2 for “AMS,” or JS–Y#2 for “Dmod Src.”
microX: The switch will control the effect of the –Y (down) direction of the joystick.
After Touch
The switch will control aftertouch.
Knob 1...4
The switch will control the effect of REALTIME CONTROLS knobs [1]–[4]. (On produces the same
effect as when the knob is rotated fully right, and Off as when it is rotated fully left.)
X50: SW1, 2/microX: SW1 (CC#80), SW2
(CC#82)
X50: The switch will control the effect of [SW1] or [SW2].
microX: The switch will control Alternate Modulation or Effect Dynamic Modulation. To control these,
choose SW1 #80 or SW2 #81.
TAP TEMPO
This switch can be used to control the tempo of the arpeggiator in realtime.
