Korg M3, Руководство по параметрам

Страница: 90 / 647

Program mode
80
P.Bend (Pitch Bend) [Off, On]
On (checked): Specifies whether to transmit the MIDI pitch
bend messages generated by the GE selected for the
KARMA Module. (See “Bend Group” on page 569)
Note: This setting also applies to the pitch bend messages
that may be produced by CC–A, CC–B, Env. 1, Env. 2, and
Env. 3
.
When the KARMA function is on and the KARMA
Module is producing pitch bend data, the pitch bend
range of the program will be controlled as follows.
The pitch bend range specified within KARMA GE will
automatically be transmitted from the KARMA
Module, and set within the program. This ensures that
the pitch bend data produced by the GE of the KARMA
will function correctly. At this time, the pitch bend data
produced when you operate the KYBD-61/73/88’s
joystick will automatically be optimized so that it will
produce the same bend effect as if the KARMA were off
(in most cases).
CC–A, CC–B [Off, On]
On (checked):
Specifies whether to transmit the various
MIDI messages generated by CC–A/CC–B of the GE
selected by the KARMA Module.
However if CC–A/CC–B are producing pitch bend
messages, these settings will be ignored, and the Pitch
Bend
setting will be used.
Env.1, Env.2, Env.3 (Envelope1, 2, 3) [Off, On]
On (checked): Specifies whether to transmit the various
MIDI messages or other functions generated by Env. 1, Env.
2, and Env. 3 of the GE selected by the KARMA Module.
(See “Envelope Group” on page 560)
If Env.1, Env.2, or Env.3 are producing pitch bend
messages, these settings will be ignored, and the Pitch
Bend
setting will be used.
Notes (GE Notes) [Off, On]
On (checked): Specifies whether the MIDI note-on/note-off
messages generated by the KARMA Module will be
transmitted.
Note: This setting lets you mute the note phrases generated
by the KARMA Module, and use only the control data
generated from the KARMA Module (e.g., pan, filter cutoff,
resonance) to apply modulation to phrases or chords you
yourself play on the keyboard.
WavSeq [Off, On]
On (checked): Specifies whether the wave sequence data
(multisample number) generated by the KARMA Module
will be transmitted.
▼
7–1–3: Menu Command
• 0: Write Program
☞
p.106
• 1: Panel–SW Solo Mode On
☞
p.106
• 2: Exclusive Solo
☞
p.107
• 3: Copy KARMA Module
☞
p.114
• 4: Initialize KARMA Module
☞
p.115
• 5: Copy Scene
☞
p.115
• 6: Swap Scene
☞
p.115
• 7: Capture Random Seed
☞
p.116
For more information, please see “Program: Menu
Command” on page 106.
7–1–4: CC Offset
In this page you can make CC Offset settings for the
KARMA function. You can specify the following items.
• The MIDI control change messages transmitted when
you turn on the KARMA function (CC Offset
parameter).
When the KARMA function is turned on, MIDI control
change messages can be transmitted to the tone generator.
Make these settings when you wish to control the program
sound or effects etc. when the KARMA function is turned
on
.
You can assign up to four MIDI control changes for each
KARMA Module.
7–1–4a: CC Offset
A:
1, 2, 3, 4:
CC# (Number) [Off, 00...95]
Selects the MIDI control change message that will be
transmitted.
The value of the transmitted message is specified by Value.
If the KARMA ON/OFF switch is on, the specified
MIDI control change message will be transmitted when
you select a program whose KARMA ON/OFF switch
is turned on. If the selected GE produces the control
change specified here, the effect of the control change
produced by the GE will be given priority.
Note: The MIDI control change messages specified here for
transmission and the MIDI control change messages
produced by the selected GE when the KARMA ON/OFF
switch is On will be reset automatically when the KARMA
ON/OFF switch is turned Off.
Value [000...127]
Specifies the value of the message that will be transmitted.
This will have no effect if CC# is Off.
7–1
–4a
7–1
–4
Menu