manualshive.com logo in svg

Korg M3, Руководство по параметрам

Поделиться
Скачать
Korg M3 Скачать руководство пользователя страница 374

Global mode

364

If Local Control is Off, MIDI transmission/reception 
will occur normally. Playing the keyboard will cause 
the corresponding note data to be transmitted, and 
received note data will play the M3’s internal sounds.

Convert Position

[PreMIDI, PostMIDI]

This setting specifies the location at which the Transpose, 
Velocity Curve, and After Touch Curve settings will be 
applied. This setting will affect the MIDI data that is 
transmitted and received, and the data that is recorded on 
the internal sequencer.

When using the M3’s keyboard or pad to play the internal 
tone generator, the Transpose, Velocity Curve, and After 
Touch Curve settings will always take effect regardless of 
this setting.

PreMIDI: 

Velocity Curve, After Touch Curve, and 

Transpose will be applied to the data that is transmitted 
from the M3’s keyboard or pad.

This means that the Velocity Curve, After Touch Curve, and 
Transpose settings will affect the data that is transmitted 
from MIDI OUT when the M3’s keyboard or pad is played, 
and the data that is recorded on the internal sequencer.
MIDI data received from MIDI IN or the data played back 
by the internal sequencer will not be affected.

PostMIDI:

 Velocity Curve, After Touch Curve, and 

Transpose will be applied to data before it enters the tone 
generator.

This means that the Velocity Curve, After Touch Curve, and 
Transpose settings will affect the data that is sent to the 
internal tone generator when you play the M3’s keyboard, 
when the internal sequencer is played back, or when data is 
received from MIDI IN.

This setting will not affect the data that is transmitted from 
MIDI OUT or recorded on the internal sequencer when you 
play the M3’s keyboard, pad or play back the sequence.

MIDI Clock:

MIDI Clock (MIDI Clock Source)

[Internal, External MIDI, External USB,

(External FireWire), Auto]

Use this setting to synchronize the M3’s KARMA function 
and internal sequencer with an external MIDI device (e.g., 
sequencer or rhythm machine) and computer.

Internal:

 The KARMA function and the internal sequencer 

will operate according to the internal clock.

Select the Internal setting when using the M3 by itself, or 
when you want the M3 to be the master (controlling device) 
so that another connected external MIDI device will 
synchronize to the MIDI Clock messages transmitted from 
the M3.

External MIDI:

 The KARMA function and internal 

sequencer will operate in synchronization with MIDI Clock 
messages from an external MIDI device connected to the 
MIDI IN connector.

External USB:

 The KARMA function and internal sequencer 

will operate in synchronization with the MIDI Clock from 
the computer (e.g., DAW application) connected to the USB 
B connector.

External FireWire:

 This will be visible and can be selected if 

the EXB-FW option is installed. The KARMA function and 
internal sequencer will operate in synchronization with the 
MIDI Clock from the computer (e.g., DAW application) 
connected to the EXB-FW connector.

Auto:

 Normally the operation will be the same as the 

Internal setting. If external MIDI Clock messages are 
received from the MIDI IN or USB B connector, the M3 will 
automatically switch to the same operation as External MIDI 
and External USB.

Note: If you select Auto when an external MIDI sequencer 
and computer is connected, the M3 will automatically 
switch to Internal operation if the external sequencer is not 
transmitting MIDI Clock messages, allowing the KARMA 
Modules to operate and parameters for which MIDI/Tempo 
Sync is turned on to function.

Note: If after receiving a MIDI Clock, Start, or Continue 
message from the MIDI IN or USB B connector, no new 
MIDI Clock message is received within an interval of 500 
ms, or if you start the M3’s sequencer from the front panel 
without having received a MIDI Clock, Start, or Continue 
message from the MIDI IN and USB B connector, the M3 will 
automatically switch to Internal operation.

Receive Ext. Realtime Commands

[Off, On]

Off (unchecked):

 Even if MIDI Clock is set to External 

MIDI, or if set to Auto and the M3 is synchronized to 
external MIDI Clock messages, MIDI Common messages 
and Realtime messages (Song Position Pointer, Start, 
Continue, Stop) will not be received. (Song Select messages 
will be received.)

Note: Use this setting if the above messages from an external 
MIDI sequencer are unnecessarily resetting the M3’s song 
settings.

On (checked):

 The above Common messages (including 

Song Select) and Realtime messages will be received.

MIDI IN

MIDI OUT

Record

Sequencer

Local

Control

OFF

ON

Tone

Generator

Play

KARMA

Enable KARMA Module
to MIDI Out

Enable MIDI In 
to KARMA Module

OFF

ON

MIDI IN

MIDI OUT

Record

Sequencer

Local

Control

OFF

ON

Tone

Generator

M3

M3

While the internal sequencer is playing 

(The playback of the internal sequencer will not be sent to the KARMA module.)

Velocity

Curve=4

Aftertouch

Curve=3

Tone

generator

Play

MIDI IN

MIDI OUT

Record

Sequencer

No

Transpose

Scale

M3

Velocity

Curve

Aftertouch

Curve

Note number 
change

Transpose

Transmitted Table

Received Table

Velocity

Curve

Aftertouch

Curve

Tone

generator

Play

MIDI IN

MIDI OUT

Record

Sequencer

Transpose

Scale

Pitch change

M3

Velocity

Curve=4

Aftertouch

Curve=3

No

Transpose

Transmitted Table

Received Table

Содержание M3








































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды