Korg Electronic Keyboard, Руководство по параметрам

Страница: 826 / 1127

Effect Guide
816
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.
063: Stereo Auto Pan
This is a stereo-in, stereo-out auto-panner. The Phase
and Shape parameters lets you create various panning
effects, such as making the left and right inputs seem
to chase each other around the stereo field.
AUTO PAN
Depth [0…100]
Sets the depth of LFO modulation.
Source [Off…Tempo]
Selects the modulation source of the depth of
modulation.
Amount [+/–100]
Sets the modulation amount of the depth of
modulation.
LFO
Waveform [Triangle, Sine]
Selects the LFO Waveform.
Shape [+/–100]
This changes the curvature of the LFO Waveform,
which controls the way that the audio moves around
the stereo field.
Phase [degrees] [–180…+180]
This determines the phase difference between the left
and right LFOs. When you gradually change the value
away from 0, the sounds from the left and right
channels will seem to chase each other around. If you
set the parameter to +180 or –180, the sounds from
each channel will cross over each other.
You’ll only hear the effect of this parameter if the input
is true stereo, with different signals in the left and right
channels.
Frequency [Hz] [0.02…20.00]
This sets the LFO speed, in Hz. It applies only when
MIDI/Tempo Sync
, below, is
Off
.
Source [Off…Tempo]
This selects a modulation source for the
Frequency
.
Amount [–20.00…+20.00]
This sets the
Frequency
modulation amount, in Hz.
MIDI/Tempo Sync [Check-box]
BPM [MIDI, 40.00…240.00]
Base Note [ … ]
Times [x1…x32]
When
MIDI/Tempo Sync
is on, the LFO speed is set by
BPM
,
Base Note
, and
Times
, instead of
Frequency
. For
more information, see “MIDI/Tempo Sync” on
page 777.
Type [Individual, Common1, Common2]
This controls whether the effect uses its individual
LFO, or one of the Common FX LFOs. For more
information, see “LFO Type” on page 777.
Common LFO Phase Offset [degrees] [+/–180]
When Type is set to
Common FX LFO 1
or
2
, this lets
you offset the phase from the master LFO.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO Shape
Pan
Pan
LFO: Tri / Sin
Depth
L-In
Left
Center Right
Output Stereo Image
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
LFO Phase = 0 degrees LFO Phase = 90 degrees LFO Phase = 180 degrees
Stereo Auto Pan - LFO Phase