manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

Insert Effects (IFX1…IFX12)    Controlling the Insert Effects via MIDI

745

you want to use the 

Send1

 or 

Send2

 levels to route the 

signal through a master effect in series (i.e., not as a 
send effect).

Ctrl Bus (FX Control Bus)

This specifies the FX Control bus that follows the insert 
effect. The FX Control buses (FX Control 1, 2) are stereo 
two-channel buses.

The OASYS provides two (stereo two-channel) effect 
control buses, giving you a wide range of ways to 
control effects.

FX Control buses can be used with vocoder, 
compressor, and gate-type effects.

For details on the effects that be used with FX Control 
buses, see “FX Control Buses” on page 730.

As an example, here’s how you can use the FX Control 
bus following an insert effect.

Example: Gated Reverb

When using a gate effect with reverberant sound, 
using the reverberant sound to control the gate may 
not produce the desired results because the reverb 
extends the duration of the sound. Normally, you will 
use the un-reverberated sound to control the gate, as 
shown in the diagram below.

In this example, we send the sound from the OSC etc. 
to IFX1 and process it through an equalizer. IFX1 is 
sent via 

Chain

 to IFX2 and also sent via “Ctrl Bus” (FX 

Control Bus) to FX Control 1. The Envelope 

Source

 of 

IFX3: Stereo Gate is set to FX Control 1. This allows the 
gat to be triggered by a signal other than its input (the 
reverberant sound).

REC Bus

OASYS provides two stereo recording (REC) buses: 
REC 1/2 and REC 3/4.

Using the REC busses, you can isolate one or more 
sounds for recording or sampling–even if the sounds 
are also being mixed into the main outputs. For 
example, you can play a guitar through OASYS IFX 
while listening to a KARMA drum phrase, and record 
the processed guitar without recording the drums.

Individual Programs, Combi Timbres, Sequencer 
Tracks (both MIDI and Audio), audio inputs, and 
Insert Effects can all be routed to the REC busses, in 
addition to their main output/IFX bus settings.

If you don’t need to use the REC bus for a particular 
sound, turn it 

Off

.

Setting the REC bus to 1, 2, 3, or 4 lets you record up to 
four mono signals simultaneously. Setting it to 1/2 or 
3/4 lets you record stereo signals, including the effects 
of the “Pan (CC#08)” setting.

Send1, Send2

These parameters enable you to set the send level of 
the signals routed to Master Effects MFX1 and MFX2. 
The signal is sent in stereo to master effects MFX1 and 
MFX2. This is valid when 

Bus Select

 is L/R or Off.

If you are not using any Insert Effects, use 

Send1

 and 

Send2

 of the P8: “Routing” page in Program, 

Combination, Sequencer, and Song play modes to set 
the Master Effect send level (Use the P0: Audio Input 
(/Sampling) page in each mode to set the send level for 
the audio inputs.).

Send1

 responds to CC#93 and 

Send2

 responds to 

CC#91.

Controlling the Insert Effects via MIDI

Using the Dynamic Modulation (Dmod) function 
enables you to control all effect parameters in real-time 
during performance from the controllers of the OASYS 
or a connected MIDI sequencer. You can also control 
the 

Pan (CC#8)

, 

Send1

, and 

Send2

 parameters in the 

same way.

Program and Sampling modes

You can control the parameters on the global 

MIDI 

channel

.

Combination mode

The P8 - IFX1–12 page lets you specify the control 
channel 

 (Control Channel) for IFX1–12. You can 

choose from CH01–16, Gch, or All Routed.

Ch01–16:

 Select this when you want to control each 

insert effect from a different channel. An “*” symbol 
will be displayed at the right of the MIDI channel 
Ch01–16 of the timbre that is routed to each insert 
effect. If the routed timbres have different MIDI 
channel settings, this parameter is used to specify the 
channel that will control the insert effect.

IFX2

101: Reverb Hall

IFX3
009: Stereo Gate

OSC1&2
Timbre/Track
Audio Inputs

Bus Select
: IFX1

Chain to
: IFX3

FX Control Bus
: FX Ctrl1

Envelope Source
: FX Ctrl1

Gated Reverb Example

Bus Select
: L/R

(FX Control Bus1)

IFX1
012: Stereo
         Graphic 7EQ

Chain to
: IFX2

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

Mad Catz S.T.R.I.K.E. 11 Quick Start Manual preview
S.T.R.I.K.E. 11
Бренд: Mad Catz Страницы: 40
Advantech KBD-6307 User Manual preview
KBD-6307
Бренд: Advantech Страницы: 14
Canyon CNS-HKB6 Quick Start Manual preview
CNS-HKB6
Бренд: Canyon Страницы: 10
A4Tech GK-300 User Manual preview
GK-300
Бренд: A4Tech Страницы: 4
Sony SmartBand SWR10 User Manual preview
SmartBand SWR10
Бренд: Sony Страницы: 18
Sony SmartBand 2 SWR12 User Manual preview
SmartBand 2 SWR12
Бренд: Sony Страницы: 21
Yamaha ELBU-F01 Assembly Instructions preview
ELBU-F01
Бренд: Yamaha Страницы: 4
Yamaha DDKU-L7 Owner'S Manual preview
DDKU-L7
Бренд: Yamaha Страницы: 1
Yamaha Electone B-605 Owner'S Manual preview
Electone B-605
Бренд: Yamaha Страницы: 13
Yamaha Disklavier Silent MPX70 Quick Start Manual preview
Disklavier Silent MPX70
Бренд: Yamaha Страницы: 13
Yamaha Electone B-4 Playing Manual preview
Electone B-4
Бренд: Yamaha Страницы: 22
Yamaha CS01 Service Manual preview
CS01
Бренд: Yamaha Страницы: 20
Yamaha Electone B-60 Manual preview
Electone B-60
Бренд: Yamaha Страницы: 31
Yamaha DX11 Operating Manual preview
DX11
Бренд: Yamaha Страницы: 36
Yamaha DX11 Operatiing Manual preview
DX11
Бренд: Yamaha Страницы: 36
Yamaha DX11 Service Manual preview
DX11
Бренд: Yamaha Страницы: 60
Yamaha DGX 205 - Portable Keyboard With MIDI Owner'S Manual preview
DGX 205 - Portable Keyboard With MIDI
Бренд: Yamaha Страницы: 94
Yamaha DJX-II Owner'S Manual preview
DJX-II
Бренд: Yamaha Страницы: 100

Бренды по названию

Популярные бренды

Загрузить еще бренды