manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

Global mode

686

* More time will be required if the song data 
contains System Exclusive events, since these must 
be converted.

When performing a data dump from the OASYS 
onto a MIDI data filer, do not transmit multiple data 
dumps together. If multiple data is saved together, 
the OASYS will have less than the required time 
(right column in the table above) to write the data 
into memory, and will be unable to receive all of the 
data correctly.

Receiving SysEx data dumps

Do not touch the OASYS’s switches or turn off the 
power while data is being received.

Before receiving MIDI data, we recommend that 
you close any open dialog box or menu, with the 
exception of the Disk page menu command “Save 
Exclusive (Receive and Save MIDI System Exclusive 
Data)” dialog box.-

After a data dump is received, the OASYS will 
require approximately one second to process the 
data and write it into memory. During this time, the 
display will show the message, “Now writing into 
internal memory.” While this message is shown, 
you must under no circumstances turn off the 
power of the OASYS. If the power is turned off 
during this time, the OASYS may fail to operate 
correctly when the power is turned on again.

Transmission and reception of MIDI data is also 
impossible during this time. When receiving 
multiple data dumps in succession, you must allow 
enough time between each data dump for the 
message to disappear from the screen.

MIDI cannot be transmitted or received while data 
is being written into internal memory. Also, 
transmission of Active Sensing (FEh) from the MIDI 
OUT connector and USB connector will be halted.

Cautions when receiving Program data

• When receiving a data dump for a bank or a single 

program, and the bank type of the received 
program is different, a message of “Program Bank 
Type Conflicts” will appear, and the data will not 

be received. For the USER-A through G banks, use 
Global “Set Program User-Bank Type” to specify 
the appropriate bank, and then receive the data 
again.

• When receiving an All Programs data dump, only 

bank data whose bank type matches will be 
received. If banks of a different bank type are 
received, a message of “Program Bank Type 
Conflicts” will be displayed.

Data dump reception procedure

1. If you’re using a computer that is able to receive 

MIDI System Exclusive messages, connect the 
MIDI OUT connector of your computer’s MIDI 
interface to the OASYS’s MIDI IN connector (see 
p.258).

If you are using a MIDI data filer, connect the 
OASYS’s MIDI OUT connector to the MIDI IN 
connector of the MIDI data filer. 

2. Set the MIDI channel of the MIDI device to match 

the global MIDI channel (1–1a) of the OASYS.

If you want the OASYS to receive data that was 
previously transmitted to a MIDI device, you must 
set the global MIDI channel of the OASYS to the 
same global MIDI channel that was used when the 
data was transmitted.

To set the MIDI channel of the transmitting device, 
refer to the owner’s manual for that device.

3. Either check “Enable Exclusive” (1–1c), or display 

one of the page menu commands of this page.

When one of these page menu commands is 
displayed, data dumps can be received regardless of 
the “Enable Exclusive” setting.

4. Transmit the data from the other device. For the 

procedure, refer to the owner’s manual for the 
device you are using.

While the data is being received, the display will 
indicate “Now received MIDI data.”

Set Up KARMA External MIDI Routing

When using the KARMA function in conjunction with 
an external sequencer, you can execute this command 
with the appropriate setting to automatically make 
settings for Global mode “Enable KARMA Module to 
MIDI Out,” “Enable MIDI In to KARMA Module,” and 
“Local Control On” (1–1a).

1. Choose “Setup KARMA External MIDI Routing” 

to open the dialog box.

2. Select the desired routing.

Send the output of KARMA to external 
device/sequencer

Choose this if you want the phrases generated by 
the OASYS’s KARMA Module to be sent via MIDI 
to control your external MIDI device or to be 
recorded on your external MIDI sequencer.

Combination Single

8887

3.0

Drum Kit All

1962624

675.8

Drum Kit Bank (INT)

516480

175.7

Drum Kit Bank (U-A…U-G) 206592

70.3

Drum Kit Single

12912

4.4

Wave Sequence All

513876

172.7

Wave Sequence Bank 
(INT)

206100

60.0

Wave Sequence Bank
U-A…U-G)

43968

15.0

Wave Sequence Single

1374

0.5

Global Setting

28146

9.5

Sequencer

24265…
6065067

6.4…1651.5

Type of data to be 

dumped

Data size 

(Bytes)

Time required 

(Sec.)

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

Garmin vivofit 3 Owner'S Manual preview
vivofit 3
Бренд: Garmin Страницы: 14
Garmin Forerunner 225 Owner'S Manual preview
Forerunner 225
Бренд: Garmin Страницы: 14
KROM Kael User Manual preview
Kael
Бренд: KROM Страницы: 16
Stanley GLPS Instruction Manual preview
GLPS
Бренд: Stanley Страницы: 6
ID Tech VERSAKEY Manual preview
VERSAKEY
Бренд: ID Tech Страницы: 16
AAMP Global ECHOMASTER PRO ParkAlert PS-TRUCK30 User Manual preview
ECHOMASTER PRO ParkAlert PS-TRUCK30
Бренд: AAMP Global Страницы: 12
GE 97764 Instruction Manual preview
97764
Бренд: GE Страницы: 2
Cherry G83-6000 Specifications preview
G83-6000
Бренд: Cherry Страницы: 3
Peiying PY-EM01 Owner'S Manual preview
PY-EM01
Бренд: Peiying Страницы: 28
Matias FK302-JP-TP4 Quick Setup preview
FK302-JP-TP4
Бренд: Matias Страницы: 2
InnoCigs CUBIS 2 User Manual preview
CUBIS 2
Бренд: InnoCigs Страницы: 49
InnoCigs VAPANION CASCADE ONE PLUS User Manual preview
VAPANION CASCADE ONE PLUS
Бренд: InnoCigs Страницы: 84
BOW HB092 Manual preview
HB092
Бренд: BOW Страницы: 4
Zoom 9005 Quick Start Manual preview
9005
Бренд: Zoom Страницы: 6
MoreFit Pure User Manual preview
Pure
Бренд: MoreFit Страницы: 34
Franklin DBE-1500 User Manual preview
DBE-1500
Бренд: Franklin Страницы: 7
Ranger TouchPad RG2ACKB482 User Manual preview
TouchPad RG2ACKB482
Бренд: Ranger Страницы: 4
Trust MaxTrack 17088 User Manual preview
MaxTrack 17088
Бренд: Trust Страницы: 47

Бренды по названию

Популярные бренды

Загрузить еще бренды